1848196 Members
6648 Online
104022 Solutions
New Discussion

Re: mailx problem

 
Graham Van der vaart
Frequent Advisor

mailx problem

Hi,
We have a problem that was previously described in the message http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x1938cbaac6dcd5118ff40090279cd0f9,00.html.
The solution was to load a patch PHNE_16390 on HP-UX11.0.
We are running 11.11 and I would like to know the solution.
Regards
Graham
5 REPLIES 5
Steve Steel
Honored Contributor

Re: mailx problem

Hi


Patch Name: PHSS_26978

Patch Description: s700_800 11.11 TC-SysSetup Cumulative Patch

Creation Date: 02/05/14

Post Date: 02/07/16

Hardware Platforms - OS Releases:
s700: 11.11
s800: 11.11


Sorted my mail problems.


Steve Steel
If you want truly to understand something, try to change it. (Kurt Lewin)
Graham Van der vaart
Frequent Advisor

Re: mailx problem

Thanks for the response, sorry I took so long to get back on this thing.
I tried to install the patch but could not because the thing would not match a product.
I looked in the patch text file and it replaces only one file which was not installed on my system. We have all the latest and greatest hardware patches etc installed.
Any other ideas?
Regards
Graham
T G Manikandan
Honored Contributor

Re: mailx problem

could not open the link 404 error.

What is the problem

REvert
Graham Van der vaart
Frequent Advisor

Re: mailx problem

Hi
This was the problem ( as discussed in the linked message) except I am running 11.11 .....

Sendmail is configured on HP-UX 10.20 server, and it send mail out just fine. However, when my outlook receives the email, I have the following message:
-------
This message uses a character set that is not supported by the Internet Service. To view the original message content, open the attached message. If the text doesn't display correctly, save the attachment to disk, and then open it using a viewer that can display the original character set.
--------
As the result, my message is actually in a text file attachment. I can open the attachment with notepad and read it.

Steven E. Protter
Exalted Contributor

Re: mailx problem

Email daignostic command.

Run it, type a one line message, then a period and enter.

It will show you diagnostics, indicating if the problem is DNS or mail relay server.

If you can paste in an error message it would help. HP link is bad for some reason.

/usr/sbin/sendmail -v -d8.99 -d38.99 somebody@targetdoman.net

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com