make_net_recovery problem

[ganeshan srinivasan]

Hi All,

When I run make_net_recovery, I am getting the following error.

# make_net_recovery -s 10.95.11.94
* Creating NFS mount directories for configuration files.
ERROR: Could not make directory:
/var/opt/ignite/recovery/client_mnt/0x001083FDCD22: Permission denied
(errno = 13)
ERROR: Failed creating the directory
/var/opt/ignite/recovery/client_mnt/0x001083FDCD22:Permission denied
(errno = 13)
ERROR: Failed to create NFS mount directories for configuration files.

======= 04/14/08 15:16:12 EST make_net_recovery completed unsuccessfully


I can manually mount /var/opt/ignite/recovery/client_mnt directory from 10.95.11.94 and create a directory or file .

Below is the exportfs output on ignite server.

# exportfs
/var/opt/ignite/recovery/client_mnt -anon=2


I would appreciate your help.

Thanks in advance.

[likid0]

Hy, you don't whant to export /var/opt/ignite/recovery/client_mnt

you should have in exportfs:

/var/opt/ignite/clients -anon=2
/var/opt/ignite/recovery/archives/HOSTNAMEOFSERVER -anon=2


then:
#exportfs -av

Both of the dirs should have bin:bin perms

[Sandy Chen]

Hi,

Have you tried to do NFS manually of /var/opt/ignite/recovery/client_mnt on the client??

Regards,
Sandy

[ganeshan srinivasan]

Thank you all for your response.

Orange_adm, /var/opt/ignite/clients directory was owned by root:sys. Once I changed that to bin:bin it started working. Now I have a different problem. I have a newer version of Ignite on the client. So I am getting this error.

# make_net_recovery -s 10.95.11.94
* Creating NFS mount directories for configuration files.

======= 04/14/08 19:10:19 EST Started make_net_recovery. (Mon Apr 14 19:10:19
EST 2008)
@(#)Ignite-UX Revision C.7.4.157
@(#)ignite/net_recovery (opt) Revision:
/branches/IUX_RA0712/ignite/src@72068 Last Modified: 2007-11-01
14:16:06 -0600 (Thu, 01 Nov 2007)

* Testing for necessary pax patch.
* Checking Versions of Recovery Tools
ERROR: The version of the tools used for system recovery on "dsmprod" is
newer than the version found on the server system "10.95.11.94". You
need to either update the version of Ignite-UX on the server or
down-date the version on "dsmprod"

======= 04/14/08 19:10:21 EST make_net_recovery completed unsuccessfully


Ignite version on the client is C.7.4.157 & the server version is C.7.2.94.

Where can I download C.7.2.94 Ignite software?

[Scot Bean]

Glad you figured out the ownership 'bin' issue.

Find older version of Ignite is easy if you have copies of install media around. HP only offers the latest, greatest version from their download website, however.

If you just need to sync up the Ignite versions to create a recovery image, you should have everything you need already. No old media required.

Here's what you can do.

On your Ignite server, try 'swlist -l depot' and see if there is any depot named like '/var/opt/ignite/depots/recovery_cmds'.

If not, you can create it with the '/opt/ignite/lbin/pkg_rec_depot' cmd.

Remove any other Ignite version from your target. Then install this 'IUX-Recovery' bundle on the client. This should allow you to create a recovery image with matching versions.

This is covered on page 4 of this whitepaper: http://docs.hp.com/en/5992-1977/5992-1977.pdf

[YAQUB_1]

Hi,

>>> ERROR: The version of the tools used for system recovery on "dsmprod" is
newer than the version found on the server system "10.95.11.94". You
need to either update the version of Ignite-UX on the server or
down-date the version on "dsmprod"
===> Ur Ignite software version is conflict, U need update both side same version.

>>> Ignite version on the client is C.7.4.157 & the server version is C.7.2.94.
===> U did not mention which OS version Ur using, because depends on OS version U can check the below link:-
http://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=IGNITEUXB

Thanks--Yaqub
I am a Customer Advocate!!!

[ganeshan srinivasan]

Thanks Yaqub.

[likid0]

If the answers where of any help please asinng points

[YAQUB_1]

Hi,

I really disappoint for Ur simple thanks, because we are forum members expend our valuable time for U & try to resolve Ur problem.....

I really appreciated U give us points who has been involved Ur problem & try to resolve.

Thanks--Yaqub
I am a Customer Advocate!!!