make_recovery

[khilari]

Hi people, i was making ignite tape when i discovered in the /opt/ignite/bin directory that i didnt have any make_tape_recovery.
But had make_recovery so i used the old method, but i am getting this error. Now, the fileset that it says is missing, what should i do about it...thanks

>make_recovery -ACv -d /dev/rmt/0mn
make_recovery(650): The system appears to be missing the
Ignite-UX.FILE-SRV-11-00 fileset. The file /opt/ignite/data/Rel_B.11.00/SYSCMDS
is missing. Refer to the DEPENDENCIES in the make_recovery(1M) manpage.

Option -A specified. Entire Core Volume Group/disk will be backed up.
make_recovery(210): Encountered a fatal error.
make_recovery(212): Please fix errors and re-try.

[James R. Ferguson]

Hi:

It would appear that you have a very old verion of Ignite.

I'd 'swremove' your current version; download a new one (see below) and 'swinstall' it:

http://www.docs.hp.com/en/IUX/download.html

Once installed, I'd use:

# /opt/ignite/bin/make_tape_recovery -x inc_entire=vg00 -I -v -a /dev/rmt/0mn

Regards!

...JRF...

[Tim Nelson]

When in doubt remove and reinstall. Preferably new version.

Available for download on software.hp.com

[Darrel Louis]

Hi,

When you've installed the new version of Ignite, also perform a swconfig \*

Darrel