Metrocluster integration with modular package

[szewczyk]

Hi,
I have Metrocluster A.0.5, SG A.19, hpux 11.31.
I have created modular package and package_CAEVA.env
I have done everything from the document describing implementation of Metrocluster with EVA, but I would like to use modular packed instead of old way wchich is describe in doc.
Where and what script should I put, to finish the proper integration.
thanks a lot for your opinion
romek

[melvyn burnard]

Welltake a nother look at the manual http://docs.hp.com/en/B7660-90027/B7660-90027.pdf
Page 186 onwards describes this

[szewczyk]

Hi,
Thanks, but it rather describe how to use old way in new modular package. I would like to use new packaget like dts/dts, dts/evca etc. I think this would be how it should look like in modular package. I cannot find a new doc describing MetroCluster implementation in the moduler package
romek

[Sameer_Nirmal · Accepted solution]

Starting from version A.04.00, Metrocluster with Continuous Access EVA packages can also be configured as Serviceguard Modular packages, using the Metrocluster with Continuous Access EVA supplied module dts/mccaeva. With this support, there is no need to create or distribute the control script files across nodes. Only the Metrocluster environment file must be created and distributed across the nodes.

http://docs.hp.com/en/B7660-90026/B7660-90026.pdf

[szewczyk]

thank You for your help.
I succeded to create proper modular MetroCluster package.
regards romek