mib2agt memory leak?

[John Payne_2]

Does anyone know of a problem with a memory leak in the mib2agt? I have a couple machines where the mib2agt is taking an extraordinary amount of memory... (Like 250MB on 1 machine.)

Thanks

John

[James R. Ferguson · Accepted solution]

Hi:

Yup. This is a known problem in 11.0 fixed sometime ago. The latest patch is PHSS_23670.

Regards!

...JRF...

[Uday_S_Ankolekar]

Hi,

This is known problem. Patch is the remedy , No reboot required.
Patch # PHSS_23670

Good luck

-USA..

[linuxfan]

Hi John,


what patches do you have installed. There was an issue of memory leak (HP Doc 1653302323 )when the patch PHSS_17386 was installed. This was fixed in PHSS_18758. The latest patch for this is PHSS_23670

-Ramesh

[Sridhar Bhaskarla]

I have seen many sites running SNMP though they never use it. Unless you are using an Network Management server like Openview IT/O or NNM, or sending SNMP traps you can disable it. If you are using it, you can install the patch PHSS_23670 to get rid of this memory leak problem.

-Sri

[John Payne_2]

Thank You for the replies. Thank You for the explaination of the mib2agt also.

John