Model 12H Warning Message

[Lawrence Kaufman]

Hello All!

I added a Model 12H to a K-Class that was upgraded from 10.20 to 11i. (fresh install) Check out the following messages. Any idea how I can fix the warning?

Starting VxVM daemon...
VxVM starting in boot mode...
NOTICE: vxvm:vxdmp; added disk array 0000000E94F0
datype= AUTORAID

WARNING: vxvm:vxdmp: UNLICENSED ARRAY S/N 0000000E94F0 installed

vxvm:vxconfigd: ERROR: enable failed: Volboot file not loaded
transactions are disabled.

vxvm:vxconfigd: FATAL ERROR: Rootdg cannot be imported during boot.

I guess these are related to the Veritas Volume Manager?
Do you know where I an get some info on this?

thanks
L.Kaufman

[Helen French · Accepted solution]

Do you have vxvm configured? If not, then follow the procedure on this document (TKB #UVXVMKBRC00010358):

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000066581348

[Steffi Jones_1]

Hello,

check and make sure that you do NOT use vxvm.

If you do not use it you can follow the steps below:

# touch /etc/vx/reconfig.d/state.d/install-db
# shutdown -ry 0

That can happen if you use an image from a different box that uses vxvm.

Steffi

[Helen French]

Another solution can be found from this document (if you are using vxvm) TKB #KBRC00009541:

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000065011339

[Jose Mosquera]

Hi,

Take a look at these links:

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xb52806350fe2d61190050090279cd0f9,00.html

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0xaf20eea29889d611abdb0090277a778c,00.html

Rgds.