Monitoring HP RAID devices in NETSERVER PRO and LH Series

[John_39]

I am using WhatsUp Gold to monitor the network as well as devices. First I would like to monitor the RAID failures in HP Netservers and then go ahead one step at a time.

I already have my MIB loaded for DiskArray1,2,3 etc....

which is

Disk Array1 - 1.3.6.1.4.1.16.1.1.200.9001
Disk Array2 - 1.3.6.1.4.1.16.1.1.200.9002
Disk Array3 - 1.3.6.1.4.1.16.1.1.200.9003

etc...

But in my WhatsUp Gold 6.0 version running on Windows NT Server, I also need to set up other properties for this Custom Services for each of these MIBs like

Whether it is going to be a constant or Rate of Change.....

Less than --- Equal to ---- Greater than

VALUE

A TRUE state indicates Up or Down

I am not sure what would be the properties value that I need to set for it, and if anyone has any idea to share kindly let me know.

thanks and i appreciate your early reply.