mount - unrecognized vxfs version number

[Giacomo Fazio_1]

I add a new DAT but i used same scsi id of internal disk.
After reboot the SO do not see a directory /mail that is /dev/vg00/lvol10 and other Directories i created in the last 2 months under /opt!!!!! Strange !!!
It is as it works with an old configuration!!!
What happne????

[Fabio Ettore]

Ciao Giacomo,

I am not sure to understand your problem.
What is the problem?

- mount fails with 'unrecognized vxfs version number'
or
- O.S. (what is the version? see it by 'uname -a') doesn't see directories /mail and some under /opt?
or
- both?

Please explain again your problem.

Best regards,
Ettore

P.S.: se vuoi metti la questione anche in italiano così che posso capire meglio il problem

[Elmar P. Kolkman]

Could it be those directories were manually mounted and thus not in /etc/fstab ?!

[Sanjiv Sharma_1]

Hello,

Please check these links:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=37836

hth.

[KapilRaj]

fsck -y /dev/vg00/lvol10 ???

Regds,

Kaps

[Shaikh Imran]

Hi,
Pls do a complete fsck &
Try to manually mount the filesystem
#mount /dev/vg00/lvol10 /mail
If succesful then add this line in /etc/fstab.

regs

[SureshKumar_2]

Hi

Change the new DAT id, which has not used in this system. Since the problem was due to ID conflick.

If it workts fine in Old configuration, (IF I am right without new DAT) then certainly ID clash.

Hope this will solve ur problem

suresh

[Rich Wright]

I had same error message.
My problem was mounting HP-UX 11i (v4) file system on HP-UX 11.00 server.
Answer was:
"Upgrade to Online JFS 3.3 & re-apply all related patches"
Work-a-round was:
Backup the file system on the HP-UX 11i server.
umount the file system.
mkfs -F vxfs -o version=3 /dev//
mount the file system.
restore the file system.

[Giacomo Fazio_1]

Grazie Ettore,

con HP siamo venuti a capo che non c'e' soluzione.
Ho dovuto ricreare i volumi.
Non riesco a capire cosa e' accaduto!!!
Ho collegato una unita' DAT HP DDS3 sulla scsi con lo stesso id del disco interno, 6.
Ovviamente la macchina non e' ripartita.
Ho portato l'unita' DAT a scsi id 4.
La macchina e' ripartita, ma ops /dev/vg00/lvol10 scomparsa e una directory sotto /opt sparita!!!!
Sembra di essere tornati ad una configurazione di 3 mesi prima!!!
Mistero?!?!?!
Hai idea?
Giacomo