HPE Community
Operating System - HP-UX
1834704 Members
2782 Online
110069 Solutions
New Discussion

Re: MRTG and snmp woes

 
Geoff Wild
Honored Contributor

‎05-09-2006 07:47 AM

‎05-09-2006 07:47 AM

MRTG and snmp woes

Currently monitoring about 60 servers with mrtg.

Mrtg running on AIX 5.2 server.
Monitoring over 40 HP-UX servers.

for some reason, 4 HP servers are not displaying...

In /var/adm/mrtg.log

2006-05-09 13:35:01 -- Started mrtg with config '/htdocs/mambo/mrtg/mrtg.cfg'
2006-05-09 13:35:02 -- SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.4.1.11.2.3.1.1.15.0)
SNMPv1_Session (remote host: "server7.mydomain.com" [192.168.2.144].161)
community: "public"
request ID: 236718950
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 490
2006-05-09 13:35:02 -- SNMPGET Problem for .1.3.6.1.4.1.11.2.3.1.1.15.0 .1.3.6.1.4.1.11.2.3.1.1.13.0 sysUptime sysName on public@server7.mydomain.com::::::v4only
at /usr/local/mrtg-2/bin/mrtg line 1846
2006-05-09 13:35:02 -- SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.4.1.11.2.3.1.1.16.0)
SNMPv1_Session (remote host: "server7.mydomain.com" [192.168.2.144].161)
community: "public"
request ID: 236718951
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 490
2006-05-09 13:35:02 -- SNMPGET Problem for .1.3.6.1.4.1.11.2.3.1.1.16.0 .1.3.6.1.4.1.11.2.3.1.1.14.0 sysUptime sysName on public@server7.mydomain.com::::::v4only
at /usr/local/mrtg-2/bin/mrtg line 1846

That server is part of a cluster - the other node is fine and snmpd.conf is identical...

That server is 11.11, but also on 3 11.23 servers I get the same response...

On one of those servers (rp4440) it has an identical prod system - which works.

Same OS OE and yet 1 works and the other doesn't...

snmpwalk appears to work...


Here what s in my mrtg.cfg:

#------------------------------------------

Target[pc0710.cpu]:.1.3.6.1.4.1.11.2.3.1.1.15.0&.1.3.6.1.4.1.11.2.3.1.1.13.0:public@server7.mydomain.com + .1.3.6.1.4.1.11.2.3.1.1.16.0&.1.3.6.1.4.1.11.2.3.1.1.14.0:public@server7.mydomain.com
Title[pc0710.cpu]: CPU Load on server7.mydomain.com
MaxBytes[pc0710.cpu]: 100
Ylegend[pc0710.cpu]: CPU Load
ShortLegend[pc0710.cpu]: %
PageTop[pc0710.cpu]:

CPU Load on server7


Options[pc0710.cpu]: integer, growright, nopercent
WithPeak[pc0710.cpu]: wmy
LegendO[pc0710.cpu]: User/System:  
LegendI[pc0710.cpu]: Idle/Nice:  
Legend1[pc0710.cpu]: Idle/Nice CPU Time
Legend2[pc0710.cpu]: User/System CPU Time
Legend3[pc0710.cpu]: Maximal Idle/Nice CPU Time
Legend4[pc0710.cpu]: Maximal User/System CPU Time

Target[pc0710.mem]: .1.3.6.1.4.1.11.2.3.1.1.7.0&.1.3.6.1.4.1.11.2.3.1.1.8.0:public@server7.mydomain.com
Title[pc0710.mem]: Memory on server7.mydomain.com
MaxBytes[pc0710.mem]: 1000000000
Ylegend[pc0710.mem]: Memory Usage
ShortLegend[pc0710.mem]:  
PageTop[pc0710.mem]:

Memory on server7


Options[pc0710.mem]: integer, gauge, growright, nopercent
kilo[pc0710.mem]: 1024
WithPeak[pc0710.mem]: wmy
kMG[pc0710.mem]: k,M,G
LegendO[pc0710.mem]: Total:  
LegendI[pc0710.mem]: Free:  
Legend1[pc0710.mem]: Free System Memory
Legend2[pc0710.mem]: Total Available System Memory
Legend3[pc0710.mem]: Maximal Free System Memory
Legend4[pc0710.mem]: Maximal Available System Memory

#------------------------------------------

Any ideas?

Rgds...Geoff



Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
11 REPLIES 11
Jannik
Honored Contributor

‎05-09-2006 08:13 AM

‎05-09-2006 08:13 AM

Re: MRTG and snmp woes

Hey Geoff,

Then you say that the configuration files are identical you meen identical "diff". So this is probably a wild guess:
DNS is it working correctly?
compare /etc/nsswitch.conf
compare /etc/resolv.conf

nslookup work both ways (normal and reverse)

The duplex could not be an issue but anyway "lanadmin -sx <1...>"

Hope you get it to work!
Best Regards,
Jannik
jaton
0 Kudos
Geoff Wild
Honored Contributor

‎05-09-2006 08:21 AM

‎05-09-2006 08:21 AM

Re: MRTG and snmp woes

diff is clean:

# diff /etc/nsswitch.conf /tmp/nsswitch.conf

# diff /etc/resolv.conf /tmp/resolv.conf

# diff /etc/snmpd.conf /tmp/snmpd.conf

speed/duplex the same...

Rgds...Geoff


Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
Steven E. Protter
Exalted Contributor

‎05-09-2006 08:34 AM

‎05-09-2006 08:34 AM

Re: MRTG and snmp woes

Shalom Geoff,

How goes it?

I'm thinking about corrupt installation. swverify the depot components and consider remove/reinstall of non depot componenets on effected servers.

I'm also thinking of switch configuration blocking the traffic. Check with the Cisco admins.

I'm thinking of putting a packet sniffer like tcpdmp or ethereal and see if there is a networking problem.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
0 Kudos
Geoff Wild
Honored Contributor

‎05-10-2006 01:35 AM

‎05-10-2006 01:35 AM

Re: MRTG and snmp woes

Hey SEP!

Nope - not a networking issue - as I can snmpwalk the machines.

Nothing interesting in the swverify (IE same on working and non working systems).

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
Ralph Grothe
Honored Contributor

‎05-10-2006 08:44 PM

‎05-10-2006 08:44 PM

Re: MRTG and snmp woes

Hm, you said snmpwalk appears to work.
Can you snmpwalk sysName and sysUptime on the nodes that fail?
Maybe a broken or not loaded MIB?
You could also try to run the MRTG script of the manager in the Perl debugger and especially around line # 490 in SNMP_util.pm inspect how variables are set (OID mapping, contents of PDU etc., use |x in the debugger to see the full object)
Madness, thy name is system administration
0 Kudos
Geoff Wild
Honored Contributor

‎05-11-2006 01:31 AM

‎05-11-2006 01:31 AM

Re: MRTG and snmp woes

I can't seem to snmpwalk sysName on any node...

What I can do is:

On a node that works:

# snmpwalk -v2c -c public svr1104
iso.3.6.1.2.1.1.1.0 = STRING: "HP-UX svr1104 B.11.23 U 9000/800 3394666127"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.11.2.3.2.3
iso.3.6.1.2.1.1.3.0 = Timeticks: (305990635) 35 days, 9:58:26.35
iso.3.6.1.2.1.1.4.0 = ""
iso.3.6.1.2.1.1.5.0 = STRING: "svr1104.mydomain.com"
iso.3.6.1.2.1.1.6.0 = ""
iso.3.6.1.2.1.1.7.0 = INTEGER: 72
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.2.1.0 = INTEGER: 13
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
iso.3.6.1.2.1.2.2.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.2.2.1.1.5 = INTEGER: 5
iso.3.6.1.2.1.2.2.1.1.6 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.1.7 = INTEGER: 7
iso.3.6.1.2.1.2.2.1.1.8 = INTEGER: 8
iso.3.6.1.2.1.2.2.1.1.9 = INTEGER: 9
iso.3.6.1.2.1.2.2.1.1.10 = INTEGER: 10
iso.3.6.1.2.1.2.2.1.1.11 = INTEGER: 11
iso.3.6.1.2.1.2.2.1.1.12 = INTEGER: 12
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "lan0 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "lan1 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "lan2 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "lan3 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.5 = STRING: "lan4 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.6 = STRING: "lan5 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.7 = STRING: "lan7 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.8 = STRING: "lan8 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.9 = STRING: "lan9 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.10 = STRING: "lan10 HP PCI-X 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.11 = STRING: "lan6 HP PCI 1000Base-T Release B.11.23.0505.01"
iso.3.6.1.2.1.2.2.1.2.12 = STRING: "software loopback"
iso.3.6.1.2.1.2.2.1.3.1 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.2 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.3 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.4 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.5 = INTEGER: 6



On a node that isn't working:

# snmpwalk -v2c -c public svr1103
iso.3.6.1.2.1.1.1.0 = STRING: "HP-UX svr1103 B.11.11 U 9000/800 2221170464"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.11.2.3.2.3
iso.3.6.1.2.1.1.3.0 = Timeticks: (16699510) 1 day, 22:23:15.10
iso.3.6.1.2.1.1.4.0 = ""
iso.3.6.1.2.1.1.5.0 = STRING: "svr1103.mydomain.com"
iso.3.6.1.2.1.1.6.0 = ""
iso.3.6.1.2.1.1.7.0 = INTEGER: 72
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.2.1.0 = INTEGER: 4
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
iso.3.6.1.2.1.2.2.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "lan0 HP PCI Core I/O 1000Base-T Release B.11.11.18"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "lan1 HP PCI-X 1000Base-SX Release PHNE_31153 B.11.11.08"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "lan2 HP PCI-X 1000Base-SX Release PHNE_31153 B.11.11.08"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "software loopback"
iso.3.6.1.2.1.2.2.1.3.1 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.2 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.3 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.4 = INTEGER: 24
iso.3.6.1.2.1.2.2.1.4.1 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.2 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.3 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.4 = INTEGER: 4136
iso.3.6.1.2.1.2.2.1.5.1 = Gauge32: 1000000000
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
Geoff Wild
Honored Contributor

‎05-11-2006 03:12 AM

‎05-11-2006 03:12 AM

Re: MRTG and snmp woes

I think Ralph is onto something - about mibs not being loaded....

For example, on the node that does NOT work,

# snmpwalk -v1 -c public pc0710 |wc
42 175 1672

only has that much info - on the other - it just spews and spews

# snmpwalk -v1 -c public pc0711 |wc
Error: OID not increasing: iso.3.6.1.2.1.6.13.1.1.127.0.0.1.57982.127.0.0.1.5798
>= iso.3.6.1.2.1.6.13.1.1.127.0.0.1.1476.0.0.0.0.0

4767 23872 271452

How to get mibs loaded and/or check that they are loading?


Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
rob nolen
Advisor

‎05-11-2006 10:30 AM

‎05-11-2006 10:30 AM

Re: MRTG and snmp woes

Geoff,

Sorry for offtopic, but can you paste your full mrtg config for one system? I've been looking all over the place for a way to set this up for my hpux systems and have been kind of lost.

Thanks... Rob
0 Kudos
Geoff Wild
Honored Contributor

‎05-12-2006 01:29 AM

‎05-12-2006 01:29 AM

Re: MRTG and snmp woes

Rob - see:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=707417

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
rob nolen
Advisor

‎05-12-2006 04:04 AM

‎05-12-2006 04:04 AM

Re: MRTG and snmp woes

Hey Geoff,

Thanks for the reply... last ot post for this thread I promise. I'm trying to figure out what those counters mean. When I snmpwalk them, it just says counter32 and returns a value, but I cant make heads or tails of it.

What am I getting back, and are there any docs that explain them?

Thanks,

ROb
0 Kudos
Geoff Wild
Honored Contributor

‎06-02-2006 01:00 AM

‎06-02-2006 01:00 AM

Re: MRTG and snmp woes

Solution was to restart snmp on the HP servers.

For HPUX 11.23:

/sbin/init.d/SnmpHpunix stop
/sbin/init.d/SnmpHpunix start
/sbin/init.d/SnmpMib2 stop
/sbin/init.d/SnmpMib2 start


For 11.11, just re-run the daemon:

/usr/sbin/snmpd

Rgds...Geoff
Proverbs 3:5,6 Trust in the Lord with all your heart and lean not on your own understanding; in all your ways acknowledge him, and he will make all your paths straight.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.