HPE Community
Operating System - HP-UX
1832956 Members
2629 Online
110048 Solutions
New Discussion

Re: mstm in single user ?

 
TRAM
Occasional Advisor

‎12-27-2005 05:00 AM

‎12-27-2005 05:00 AM

mstm in single user ?

Hi,
Can i launch mstm in single user mode ?
If it's possible, how can i do?

thanks,
0 Kudos
Reply
2 REPLIES 2
James R. Ferguson
Acclaimed Contributor

‎12-27-2005 05:09 AM

‎12-27-2005 05:09 AM

Re: mstm in single user ?

Hi:

'stm', 'mstm' and 'cstm' live in '/usr/sbin' so you will need to mount '/usr' after you boot up into single-user mode. You may also need to mount '/tmp' and '/var'. This isn't a problem, though.

Regards!

...JRF...

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎12-27-2005 05:24 AM

‎12-27-2005 05:24 AM

Re: mstm in single user ?

You need at least to start the diagnostic subsystem too.

/sbin/init.d/diagnostic start

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.