Operating System - HP-UX
1847804 Members
3440 Online
104021 Solutions
New Discussion

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

 
thatiraju
Frequent Advisor

NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

hi GUYS,
I want to take ignite(TAPE) backup of one of my blade bl860c server running hp-ux 11.23 .
I dont have the provision to connect any external drive . I have one hp-ultrium MSL-4048 tape library which is configured with DP .
Is there anyway to take ignite backup from the tape library .
The library is conneted to sanswitch throug FC .


Thanks in advance .
Narasimha .
7 REPLIES 7
Prashanth.D.S
Honored Contributor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

Hi,

If you are able to see this tape through ioscan you can perform a ignite backup, try make_tape_recovery.

http://docs.hp.com/en/5991-0662/ch04s03.html

Rgds,
Prashanth
thatiraju
Frequent Advisor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

hi Prasanth ,
I cannot see any tape drive from ioscan .My libraray is in FC LAN .

is there any way to configure my MSL 4048 tape drive in my servers .
Pratyush Paul_1
Valued Contributor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

no you cannot use the tape drive of another system for creating recovery tapes, what you could do is, create a make_net_recovery image of your system on an ignite server, and use this image to clone/recovery/boot a system. Please read the man pages for make_net_recovery, really a great recovery tool, let me know if you have any questions.

Thanks

Pratyush
Die Hard
thatiraju
Frequent Advisor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

Hi piyush ,
Thanks for the prompt reply .
I dont have disksapce on my ignite server .I wanted to take it on tape directly .Anyway i will do it through ignite server .


Thanks and regards.
Narasimha Raju
Hakki Aydin Ucar
Honored Contributor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

make_net_recovery tool, is good choice so that you can eliminate management of multiple tapes, and in your case cost!
and besides one advantage running make_net_recovery on the client is the ability to use crontab to automate backup process.
smatador
Honored Contributor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

Hi
>>I dont have disksapce on my ignite server .I wanted to take it on tape directly.
You should try to put your archive on a nfs server
make_net_recovery -s iux-server -a nfsserver:/archivefile ...
like that, you don't have diskspace problem.
We use a filer to put the archive.
Hope it helps
thatiraju
Frequent Advisor

Re: NEED TO TAKE THE IGNITE BACKUP OF BLADE SERVER

Hi guys ,
I have configured one ignite server and taken all my ignite backups on that server . Thanks for your valuable replies .




Regards.
Raju