nfs maestro on hpux11i

[Ashraf_1]

Hi All,

I have nfs maestro solo V6.2 installed in windows NT 4.0 machine. I need to configure NT to map NT drive to nfs mount point on a new hpux 11i server. For this purpose I conducted the following steps:
First, after installation i transfered the files (HCLNFSD.C, HCLPRINT.C, HCLLOCK.C, MAKEFILE) which is under the subdirectory utility into the HCLNFS directory in my HP-UX 11i server using FTP with ASCII mode.
Then, Logged into the NFS server using Telnet, and went into the HCLNFS directory and issued the command
# make hp11.

After running this command I got the following error:
Make: Must be a separator on rules line 24. Stop.

Any body assist me on configuring this program or correct me if made anything wrong,

With best regards,
Ashraf

[Steven E. Protter]

I suggest not using nfs. Windows has a built in cifs client.

For HP-UX you need.

server
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B8725AA

Client
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B8724AA

SEP

[Ashraf_1]

CIFS program is very good software. However, My problems appears to be C shell programming error and am not a programmer. This is need to compile nfsmaestro so it could be useable as the system I have already equipped with this software. So how can we overcome the error message gotten:
Make: Must be a separator on rules line 24. Stop.

Regards,
Ashraf