NTP on HP382's running HP-UX 9.10?

[Rob Etter]

Is it possible to run NTP on an HP382 running HP-UX 9.10? My current OS does not appear to have any of the standard NTP file.
thanks.

[Pete Randall]

I'm not sure I remember correctly but I don't think NTP was available back in release 9.x. You might be able to find a freeware version but you'll probably have to download the source and compile.

I'd have to say that you should consider upgrading to a more current version of the OS.

Pete

[Bill Hassell]

Sorry, you're out of luck with NTP for 9.10 For the 300-400 series computers (obsolete for about 10 years), 9.10 was the last version of HP-UX and will never be updated. If your system has a compiler, you might try to compile and link NTP source code.

[melvyn burnard]

take a look at the porting archive:
http://hpux.connect.org.uk/

They have ntp for, hp-ux, but no tsure if they have for 9.10

[melvyn burnard]

just checked a few documents, it seems thaht you may actually have xntp with HP-UX 9.10

[Brian Hackley]

Hi,

If you can't find a copy anywhere else, you could pick up NTP at http://www.ntp.org and compile it.

Best of luck,

-> Brian Hackley