Oracle + RAC + Itanium + HPUX 11.v2 + Service Gard

[Ivajlo Yanakiev]

I have two identical
rx2600 itanium server A6870B

Also I plane to get

T1905BA ServiceGuard PPL LTU,HP-UX 11i v2
T1907BA SGe RAC PPL LTU for HP-UX 11i v2
Is it work fine.

And what is license police for T1905BA, T1907BA

[melvyn burnard · Accepted solution]

Here are some comments on hte rx2600 iP server and Serviceguard:

Supported with MC/ServiceGuard and ServiceGuard Extension for RAC A.11.14.01 and A.11.15 on HP-UX 11iv1.6 and 11iv2 respectively.
All nodes must be running the same OS revision and the same ServiceGuard or ServiceGuard Extension for RAC revision.
Limited to a maximum of 8 nodes in a cluster on HP-UX 11iv2 and 4 nodes in a cluster on HP-UX 11iv1.6.
A cluster cannot contain any PA-RISC nodes.
No Virtual Partitions support.
No ATS support.
No CVM support in HP-UX 11iv1.6.
No support for FDDI, ATM or Token Ring network interface cards.
No cluster administration through the SAM GUI.
ServiceGuard Extension for RAC is now an add on product for MC/ServiceGuard, and requires the MC/ServiceGuard product as a prerequisite. A separate license is required for each product.
The 2 built-in 10/100BT LAN ports in the rx2600 Core I/O are not supported for use with ServiceGuard

As for your licensing query
you need 1 license for each product per server.

HTH