Operating System - HP-UX
1834908 Members
2590 Online
110071 Solutions
New Discussion

Re: Path bundle installation fails

 
RCE
Occasional Contributor

Path bundle installation fails

Hi.

Need help.

During the installation of the following patch bundles, the system producing the error

- HWEnable11i(B.11.11.0612.458) ==>Hardware Enablement Patches for HP-UX 11i v1, December 2006
- GOLDQPK11i(B.11.11.0612.459) ==>Quality Pack Depot for 11i v1, December 2006

-----------
==> This is the error message coming in the swagent.log

WARNING: The rollback save area for patch fileset
"PHSS_31326.FC-TL-RUN,r=1.0" already exists and will be
preserved.
* Installing fileset "PHSS_31326.FC-TL-RUN,r=1.0" (34 of 84).
NOTE: Building a new kernel based on template file "/stand/system"
Generating module: krm...
ld: I/O error, file "/stand/build/mod_wk.d/krm/mod_conf.o": No such file or directory
Fatal error.
*** Error exit code 1

Stop.
make failure.
ERROR: The command "/usr/sbin/mk_kernel", which is used to rebuild
the kernel, has failed. Because kernel-related filesets were
installed, this command must be executed by "swinstall",
without failures, before the load can continue. Check the
above output for details about the failure.
NOTE: The Install Phase has suspended. Check the above output for
reasons.


* Aborting the Install Phase.

----------------------------------------------------------------------------------------------------

ld: I/O error, file "/stand/build/mod_wk.d/krm/mod_conf.o": No such file or directory

--> This file might get generated while building new kernel


Please help.

thanks in advance.

rce
2 REPLIES 2
Steven E. Protter
Exalted Contributor

Re: Path bundle installation fails

Shalom,

You are missing essential files from /stand

You need to restore them or get them from a working system that is on similar hardware.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Sundar_7
Honored Contributor

Re: Path bundle installation fails

I/O error...hmm, you could try cleaning up /stand/build and try the swinstall again

# rm -rf /stand/build
# mkdir /stand/build

Learn What to do ,How to do and more importantly When to do ?