PDC to HP-UX, what does it mean_?

[Sebastian Perez]

Hi everyone!
I have to do an upgrade to a rp5430, replacing one processor for 2 better. But How can I see the revisio of PDC, cause I need the revision be 42.19?
Could you help me please.

[Massimo Bianchi · Accepted solution]

Check this link, look for stm/cstm


http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5187-0161/5187-0161_top.html&con=/hpux/onlinedocs/5187-0161/00/00/9-con.html&toc=/hpux/onlinedocs/5187-0161/00/00/9-toc.html&searchterms=firmware&queryid=20031216-064744

HTH,
Massimo

(Thanks Geoff!)

[Karthik S S]

When the system boots up it display the PDC version. If you prefer not to reboot then follow this link,

http://www.unixguide.net/hp/hppdcversion.shtml

-Karthik S S

[Bernhard Mueller]

You can update PDC firmware using the standard patch installation method:

http://www5.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_27467&context=hpux:800:11:11

Regards,
Bernhard

[Sebastian Perez]

Massimo,
You have the right answer to my case. Thanks a lot for your help, it was straight.

Mueller,
I couldn´t access the site you sent me.
Thanks.
I have now the information I neede