powerpath

[vinayan]

Can anybody advise me which version of powerpath software will work with HP UX 11.00 ???

[Duncan Edmonstone · Accepted solution]

Looking at EMC's e-lab navigator, 11.00 is no longer listed as supported...

However when we look at the release notes for PP 4.5.0 A02, they still show 11.00 supported and the package can be downloaded from powerlink as well.

But you do know that 11.00 is no longer support by HP, so I don't know what position that leaves EMC if they have a problem.

HTH

Duncan

[skt_skt]

we use
EMC powermt for PowerPath (c) Version 4.5.0 (build 69) with HP-UX 11.00 on many servers

[vinayan]

Hi,

Santosh can u tell me from where(link) I can download the particular version

And pls let me know any additional patches are needed after the installation of the same

Rgds
Vinayan

[Duncan Edmonstone]

EMC don't put these on public download sites. If you are a valid EMC customer you should have or be able to obtain a login to http://powerlink.emc.com

Powerpath can be downloaded from there, but you still need to obtain a license key from EMC for it to work after its installed.

HTH

Duncan