Problem on L3000 System trang detected via timer popping

[meekrob]

Dear All,

Appreciate your help on the below problem.
One of our client has a problem on L3000,you will find below the logs, thanks in advance to help us

Log Entry # : 0

System name : uninitialized
Date : 19/02/2004 à 15:20 (correspond à date ou ils ont senti le problème)
Alert Level : 13 = System trang detected via timer popping.

Source : 1 = processor
Source Detail : 1 = processor general Source Id : 0
Problem Detail : 4 = timeout


Log Entry # : 1

System Name : Uninitialized
Date : 19/05/2003 à 7:46
Alert Level : 2 = Non-Urgent operator attention required

Source : 3 = PDH
Source Detail : 6 = Interconnect medium Source Id : 0
Problem Detail : : 3 = Non responding, my need GSP

[Naveej.K.A]

Reboot the system.

Got to GSP. View the error logs so that the attention LED stops blinking.

Run the nickel script and look out for any memory/processor errors. Script is attached along with. After running the script, execute /opt/contrib/bin/nickel to get output from /tmp/$HOSTNAME/index.html

With best wishes
Naveej

[G. Vrijhoeven]

Hi,

We had the same problem.
I think you have an unclaimed GSP if you issue an ioscan -fn. What you need to do is install a patch.
Do you have 11 or 11i installed?

Gideon

[T G Manikandan]

This could be a hardware issue.Processor going bad.

These messages can also be fixed by upgrading the firmware

[Ravi_8]

Hi

seems to be a hardware problem. install the recent patch bundle, if the same error exist log a call with HP