Problems - FTP INBOUND NOT WORKING! HELP!

[rmueller58]

tail syslog.log
Jun 11 13:20:53 esuunix1 vmunix: WARNING: modpath: DLKM is not initialized
Jun 11 13:23:22 esuunix1 vmunix: WARNING: ioctl: DLKM is not initialized
Jun 11 13:19:11 esuunix1 ftpd[6504]: User rmueller: Login incorrect
Jun 11 13:23:22 esuunix1 ftpd[7152]: pam_acct_mgmt:General Commercial Security error. 134217759
Jun 11 13:23:22 esuunix1 vmunix: WARNING: modpath: DLKM is not initialized
Jun 11 13:23:22 esuunix1 above message repeats 2 times
Jun 11 13:23:22 esuunix1 ftpd[7152]: User rmueller: Login incorrect
Jun 11 13:23:29 esuunix1 ftpd[7152]: FTP session closed
Jun 11 13:25:18 esuunix1 tftpd[6118]: Timeout (no requests in 10 minutes)
Jun 11 13:23:22 esuunix1 ftpd[7152]: User rmueller: Login incorrect

[Rita C Workman · Accepted solution]

Here's a cut/paste of a something that may help:
=================================
PROBLEM

The following messages occur in the /var/adm/syslog/syslog.log file and dmesg
output.
WARNING: modpath: DLKM is not initialized
WARNING: modpath: DLKM is not initialized
WARNING: modadm: DLKM is not initialized
WARNING: modadm: DLKM is not initialized

RESOLUTION

This is usally the result of not running kmupdate after kernel generation.

The following should correct the issue (this will require a reboot of the
system)

1. Change directories to /stand/build:
cd /stand/build

2. Create a new system file to be used for kernel generation:
/usr/lbin/sysadm/system_prep -s system

3. Create the new kernel:
mk_kernel -s ./system

4. Run kmupdate to update the Dynamically Linked Kernel Module information:
kmupdate /stand/build/vmunix_test

5. Reboot the system:
shutdown -r 0 (don't use reboot !!!)




Regards,
Rita