problems installing openssl depot on hpux 11.23

[gregj_2]

I just downloaded the package from software hp com,
the md5 is correct, but I get errors when I try to install it using swinstall:


root:/tmp# swinstall -x mount_all_filesystems=false -s /tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot OpenSSL

======= 05/04/08 10:33:39 METDST BEGIN swinstall SESSION
(non-interactive) (jobid=yunnan-0115)

* Session started for user "root@yunnan".

* Beginning Selection
* Target connection succeeded for "yunnan:/".
* Source:
/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot
* Targets: yunnan:/
* Software selections:
OpenSSL,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP
fips_1_1_2.FIPS-CONF,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-DOC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-INC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-LIB,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-MAN,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-MIS,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-RUN,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-SRC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CER,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CONF,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-DOC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-INC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-LIB,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-MAN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-MIS,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-PRNG,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-PVT,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-RUN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-SRC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swinstall.last".
* "yunnan:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
ERROR: "yunnan:/": 1 files had errors during this operation.
ERROR: "yunnan:/": 1 filesets had errors.
* The execution phase failed for "yunnan:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log yunnan-0115 @ yunnan:/".

======= 05/04/08 10:33:44 METDST END swinstall SESSION
(non-interactive) (jobid=yunnan-0115)


swjob output:

* Beginning the Install Execution Phase.
* Filesets: 19
* Files: 4242
* Kbytes: 192843
* Installing bundle "OpenSSL,r=A.00.09.07m.021" .
* Installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021" (1 of 19).
ERROR: Could not access remote file
"/opt/openssl/fips/0.9.7/openssl.cnf" in software item
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA:/opt/openssl/fips"
due to an internal error on the remote system.
ERROR: Failed installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021". Check the
above output for details.
* Retry number 1 of 1 for loading files for fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021".
* Installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021" (1 of 19).
ERROR: Could not access remote file
"/opt/openssl/fips/0.9.7/openssl.cnf" in software item
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA:/opt/openssl/fips"
due to an internal error on the remote system.
ERROR: Failed installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021". Check the
above output for details.
NOTE: The Install Phase has suspended. Check the above output for
reasons.


* Aborting the Install Phase.

======= 05/04/08 10:33:44 METDST END install AGENT SESSION (Aborted)
(pid=27712) (jobid=yunnan-0115)
root:/tmp#


now, I have no idea why it won't install those files. All I know, is that the files in depot for this one are scrambled, but md5 of the file matches the one on software.hp.com, so....
I come from linux/freebsd world, so hp ux is still black magic for me.

[Sajjad Sahir]

Dear

u can use swinstall -s then path
suppose if u downloaded the package in
u /usr/local directory after removed extension u will get the file with .depot extension

do swinstall -s /usr/local/fullpath

thanks

sajjad

[YAQUB_1]

Hi,

Put here "swlist" output.

Thanks--Yaqub

[Sajjad Sahir]

dear
if it is not also working
please send us
/var/adm/sw/swinstall.log

thank u

sajjad

[gregj_2]

funny, as I get the OpenSSL on the list of installed software,
but in /opt/openssl I won't get all the files, and files that are there are 0 in size.
full swlist follows:



#
# Bundle(s):
#

B2491BA B.11.23 MirrorDisk/UX (Server)
B6834AA B.01.03.01 HP-UX Security Patch Check Tool
B6835AA B.11.23.06.60 Netscape 7.0
B6848BA 1.4.gm.46.3 Ximian GNOME 1.4 GTK+ Libraries for HP-UX 11iV1.6
B6849AA B.02.01.02 Bastille Security Hardening Tool
B8339BA B.03.00.03 servicecontrol manager Server and Agent Bundle
B8465BA A.01.05.05 HP WBEM Services for HP-UX
B9073BA B.06.00 HP-UX iCOD (Instant Capacity on Demand)
B9788AA 1.3.1.09.07 Java2 1.3 SDK for HP-UX
B9789AA 1.3.1.09.07 Java2 1.3 RTE for HP-UX
B9901AA A.03.05.06 HP IPFilter 3.5alpha5
BUNDLE B.2008.04.14 Patch Bundle
BUNDLE11i B.11.23.0409.3 Required Patch Bundle for HP-UX 11i v2 (B.11.23), September 2004
Base-VXVM B.03.50.IA.003 Base VERITAS Volume Manager Bundle 3.5 for HP-UX
CDE-English B.11.23 English CDE Environment
FDDI-00 B.11.23.00 PCI FDDI;Supptd HW=A3739B;SW=J3626AA
FibrChanl-00 B.11.23.01 PCI FibreChannel;Supptd HW=A6795A,A5158A
GigEther-00 B.11.23.01 PCI GigEther;Supptd HW=A4926A/A4929A/A6096A;SW=J1642AA
GigEther-01 B.11.23.01 PCI GigEther;Supptd HW=A6825A/A6794A/A6847A/A8685A/A9782A/A9784A/A7109A
HPUX11i-OE B.11.23 HP-UX Foundation Operating Environment Component
HPUXBaseAux B.11.23 HP-UX Base OS Auxiliary
HPUXBaseOS B.11.23 HP-UX Base OS
IEther-00 B.11.23.01 PCI IEther;Supptd HW=A6974A
Judy B.11.11.04.15 Judy Library - development and runtime libraries for handling dynamic arrays
MOZILLA 1.2.1.03.00 Mozilla 1.2 for HP-UX
MOZILLAsrc 1.2.1.03.00 Mozilla 1.2 Source distribution
MySQL 3.23.54a.00 MySQL open-source database
NPar B.01.00 nPartition Provider - HP-UX
OnlineDiag B.11.23.01.21 HPUX 11.23 Support Tools Bundle, Jun 2003
OpenSSL A.00.09.07m.021 Secure Network Communications Protocol
ParMgr B.11.23.01.00 Partition Manager - HP-UX
Sec00Tools B.01.00.03 Install-Time security infrastructure.
T1456AA 1.4.1.03.01 Java2 1.4 SDK for HP-UX
T1457AA 1.4.1.03.01 Java2 1.4 RTE for HP-UX
T1471AA A.03.10.007 HP-UX Secure Shell
USB-00 B.11.23 Object Oriented USB Driver
hpuxwsTomcat B.5.5.23.01 HP-UX Tomcat-based Servlet Engine
hpuxwsWebmin A.1.070.10 HP-UX Webmin-based Admin
hpuxwsXml A.1.0.06.01 HP-UX XML Web Server Tools
perl D.5.8.0.A Perl Programming Language
scsiU320-00 B.11.23 PCI SCSI U320; Supptd HW=CoreIO
#
# Product(s) not contained in a Bundle:
#

DATA-PROTECTOR A.05.50 HP OpenView Storage Data Protector
PHCO_32475 1.0 ps(1) cumulative patch
PHCO_32667 1.0 csh(1) cumulative patch
PHCO_33431 1.0 tar(1) catalogs ; directory timestamp
PHCO_34129 1.0 sh-posix(1) cumulative patch
PHCO_36522 1.0 cumulative patch for bcheckrc
PHCO_36808 1.0 logins(1M) cumulative patch
PHCO_37228 1.0 libc cumulative patch
PHCO_37543 1.0 pthread library cumulative patch
PHKL_37121 1.0 ksleep kwakeup performance cumulative patch
PHKL_37122 1.0 pthread_condvar_prio_boost patch
PHKL_37231 1.0 VxFS 3.5 ACL patch,getacl fix
PHSS_33389 1.0 KRB5-Client Version 1.0 Cumulative patch
PHSS_34159 1.0 XClients Patch
PHSS_36519 1.0 Aries cumulative patch
PHSS_37225 1.0 X Font Server Patch
PHSS_37492 1.0 linker + fdp cumulative patch
bash 3.2 bash
gcc 4.2.3 gcc
gettext 0.14.5 gettext
glib2 2.14.0 glib2
libiconv 1.12 libiconv
make 3.81 make
pkgconfig 0.22 pkgconfig
termcap 1.3.1 termcap
tusc 7.8 tusc
vim 7.1 vim

[gregj_2]

/var/adm/sw/swinstall.log is rather long, I don't think I should post it here in full.

[Sajjad Sahir]

tail -20 /var/adm/sw/swinstall.log

it will give u the last 20 lines ok

thanks and regards

sajjad

[gregj_2]

if that's any clue , here's 200 lines

root:/root#tail -200 /var/adm/sw/swinstall.log
fips_1_1_2.FIPS-RUN,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-SRC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CER,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CONF,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-DOC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-INC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-LIB,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-MAN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-MIS,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-PRNG,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-PVT,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-RUN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-SRC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swinstall.last".
* "yunnan:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
ERROR: "yunnan:/": 1 files had errors during this operation.
ERROR: "yunnan:/": 1 filesets had errors.
* The execution phase failed for "yunnan:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log yunnan-0110 @ yunnan:/".

======= 05/04/08 10:14:15 METDST END swinstall SESSION
(non-interactive) (jobid=yunnan-0110)


======= 05/04/08 10:16:41 METDST BEGIN swinstall SESSION
(non-interactive) (jobid=yunnan-0111)

* Session started for user "root@yunnan".

* Beginning Selection
* Target connection succeeded for "yunnan:/".
*
"yunnan:/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot":
Cannot open the logfile on this target or source. Possibly
the media is read-only or there is a permission problem.
Check the daemon logfile and "/var/tmp/swagent.log" on this
host for more information.
* Source:
/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot
* Targets: yunnan:/
* Software selections:
+ OpenSSL,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP
openssl.OPENSSL-CER,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CONF,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-DOC,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-INC,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-LIB,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-MAN,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-MIS,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-PRNG,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-PVT,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-RUN,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-SRC,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swinstall.last".
* "yunnan:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
* "yunnan:/": 1 bundles have the selected revision already
installed.
* "yunnan:/": 1 filesets were determined to be skipped in the
analysis phase.
ERROR: "yunnan:/": 1 files had errors during this operation.
ERROR: "yunnan:/": 1 filesets had errors.
* The execution phase failed for "yunnan:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log yunnan-0111 @ yunnan:/".

======= 05/04/08 10:16:46 METDST END swinstall SESSION
(non-interactive) (jobid=yunnan-0111)


======= 05/04/08 10:17:37 METDST BEGIN swinstall SESSION
(non-interactive) (jobid=yunnan-0112)

* Session started for user "root@yunnan".

* Beginning Selection
* Target connection succeeded for "yunnan:/".
*
"yunnan:/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot":
Cannot open the logfile on this target or source. Possibly
the media is read-only or there is a permission problem.
Check the daemon logfile and "/var/tmp/swagent.log" on this
host for more information.
* Source:
/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot
* Targets: yunnan:/
* Software selections:
+ OpenSSL,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP
fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-DOC,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-INC,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-LIB,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-MAN,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-MIS,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-RUN,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-SRC,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
* A "+" indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swinstall.last".
* "yunnan:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
* "yunnan:/": 1 bundles have the selected revision already
installed.
* "yunnan:/": 1 filesets were determined to be skipped in the
analysis phase.
ERROR: "yunnan:/": 1 files had errors during this operation.
ERROR: "yunnan:/": 1 filesets had errors.
* The execution phase failed for "yunnan:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log yunnan-0112 @ yunnan:/".

======= 05/04/08 10:17:43 METDST END swinstall SESSION
(non-interactive) (jobid=yunnan-0112)


======= 05/04/08 10:33:39 METDST BEGIN swinstall SESSION
(non-interactive) (jobid=yunnan-0115)

* Session started for user "root@yunnan".

* Beginning Selection
* Target connection succeeded for "yunnan:/".
*
"yunnan:/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot":
Cannot open the logfile on this target or source. Possibly
the media is read-only or there is a permission problem.
Check the daemon logfile and "/var/tmp/swagent.log" on this
host for more information.
* Source:
/tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot
* Targets: yunnan:/
* Software selections:
OpenSSL,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP
fips_1_1_2.FIPS-CONF,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-DOC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-INC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-LIB,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-MAN,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-MIS,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
fips_1_1_2.FIPS-RUN,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA
fips_1_1_2.FIPS-SRC,l=/opt/openssl/fips,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CER,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-CONF,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-DOC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-INC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-LIB,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-MAN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-MIS,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-PRNG,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-PVT,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
openssl.OPENSSL-RUN,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA
openssl.OPENSSL-SRC,l=/opt/openssl,r=A.00.09.07m.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=A.00.09.07m.021,fa=HP-UX_B.11.23_IA/PA
* Selection succeeded.


* Beginning Analysis and Execution
* Session selections have been saved in the file
"/root/.sw/sessions/swinstall.last".
* "yunnan:/": There will be no attempt to mount filesystems
that appear in the filesystem table.
ERROR: "yunnan:/": 1 files had errors during this operation.
ERROR: "yunnan:/": 1 filesets had errors.
* The execution phase failed for "yunnan:/".
* Analysis and Execution had errors.


NOTE: More information may be found in the agent logfile using the
command "swjob -a log yunnan-0115 @ yunnan:/".

======= 05/04/08 10:33:44 METDST END swinstall SESSION
(non-interactive) (jobid=yunnan-0115)

[Sajjad Sahir]

I thinks some fileset already installed in u system the bundle also contains same file sets, so u have to remove existing one then try to install once again

[gregj_2]

is there any automated sort of way, to do it ? I did remove whole /opt/openssl dir, no go still.

[Sajjad Sahir]

dear
u have to use swlist -l product | grep -i ssOpenSSL_A.00*

then remove it

u have to assign points

sajjad

[gregj_2]

I think points are to be asigned, when something actually does work. So far no luck.
From the log, I can tell that it has problems with 'remote' filesystem access. But I don't know what that means.
Does it mean, it can't read the source, or write to destination in the error below ??

ERROR: Could not access remote file
"/opt/openssl/fips/0.9.7/openssl.cnf" in software item
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA:/opt/openssl/fips"
due to an internal error on the remote system.


root:/root#ls -la "/opt/openssl/fips/0.9.7/openssl.cnf"
-rw-r--r-- 1 bin bin 0 Apr 17 06:48 /opt/openssl/fips/0.9.7/openssl.cnf


I have no idea how it should work, but it did create empty file, I can write to that file no probs.

Also, as far as I can tell, .depot files are just tar's. So, I renamed it to .tar, and peeked on some binary files, that suppose to be execs. All I get is some scrambled content, that doesn't make any sens.
md5 is OK, tree information of tar is fine - so there's no problems with the file itself.
Perhaps swinstall, or whatever unpacks that file isn't able to unscramble its content ?

[Sajjad Sahir]

give me complete steps
from where u downloaded file in which format
pls revertback soon

sajjad

[Sajjad Sahir]

what is the model of the u system

i am seeing from archive center this package is availbale for pa-risc
are u using pa-risc
are u sure?
Gzipped
Binary Depot is u downloaded

thanks and regards

[gregj_2]

downloaded file from software.hp.com
filename, you have in number of logs above.
Than file was transfered to the serwer, via FTP (funny, you can ftp as root to the system, high security :P ).
md5 checked, matched along the way, and matches the one on HP site.

the rest is history, shown in logs above.

I also tried to get it from sources ,but got numerous errors along the way from both bundled compiler and gcc.

offnote, how long it should take from reboot to ssh to be up on the machine again ? cos it seems to be down for quite few minutes now, after 'reboot' command :/

[gregj_2]

this is itanium serwer, as far as I know.
I see no option to choose CPU type from the HP site, so I got the one for 11.23, thinking that since it is the only one available - it must be the one.

[gregj_2]

HP-UX yunnan B.11.23 U ia64 3325870327 unlimited-user license

to be precise, http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumber=OPENSSL11I

HP-UX 11i v2 - A.00.09.07m.021

[Robert-Jan Goossens_1 · Accepted solution]

Hi,

I don't think it is your problem, I think it is a corrupted depot. You should report it to the HP customer response center. Below file is either missing or corrupted inside the depot.

/opt/openssl/fips/0.9.7/openssl.cnf

OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot

Regards,
Robert-Jan

[gregj_2]

I am just someone, whos task is to install piece of software that requires openssl on the server.
openssl depot is borked, fine, but I have no idea how should I report it. And also, how long will it take HP to response, after all, it is a hudge corp, and those things move slow.

I tried to compile it with gcc, but I get loads of linking errors, that looks like some sort of FPU math lib linking problems to me (I am software developer, not admin primarily).

[Robert-Jan Goossens_1]

uhhhh.

due to an internal error on the remote system

Could you post the results of

# nslookup your_host_name
# nslookup ip_of_your_host_name

Regards,
Robert-Jan

[gregj_2]

#nslookup yunnan

Using /etc/hosts on: yunnan

looking up FILES
Name: localhost
Address: 127.0.0.1
Aliases: loopback, yunnan


#nslookup 192.168.1.54
Using /etc/hosts on: yunnan

looking up FILES
Name: yunnan
Address: 192.168.1.54

[Robert-Jan Goossens_1]

hmm, try to restart the swagentd.

# /sbin/init.d/swagentd stop
# /sbin/init.d/swagentd start

try the swinstall again.

[gregj_2]

still same thing,

restarted that daemon.
Than:
swinstall -x reinstall=true -s /tmp/OpenSSL_A.00.09.07m.021_HP-UX_B.11.23_IA_PA.depot OpenSSL

tried it without -x option too, no go.
Another option I also tried, while ago - I guess connected with nslookup problems, was -x mount_all_filesystems=false but that didn't change the error either.

* Installing fileset
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021" (1 of 19).
ERROR: Could not access remote file
"/opt/openssl/fips/0.9.7/openssl.cnf" in software item
"fips_1_1_2.FIPS-CONF,r=FIPS-OPENSSL-1.1.2.021,a=HP-UX_B.11.23_IA/PA,v=HP,fr=FIPS-OPENSSL-1.1.2.021,fa=HP-UX_B.11.23_IA/PA:/opt/openssl/fips"
due to an internal error on the remote system.

[gregj_2]

if that's something you also interested in, I can show you content of /etc/nsswitch.conf :

hosts: dns [notfound=continue] files

[Robert-Jan Goossens_1]

is 192.168.1.54 in your /etc/hosts file? If not could you add it to your hosts file and restart the swagentd again.