Query on X.25

[Mike Fisher_5]

Hi -

THE SETUP:
Our client [Abroad & asleep] has a K580 with:
J2792A. X.25 high speed HP-PB card
J2792A. Opt 1AU. V.35 interface cable

MY QUESTIONS:
Does any one know...
1] Gender of cable
2] No of pins, shape etc

[I shall feel such a prat if someone comes back with the reply...
"It's got 35-pins & it's V-Shaped"
but I'm prepared to take the risk.]

8^)

Regards - Mike

[melvyn burnard · Accepted solution]

Try this:
WAN link end Bridge end CCITT Signal name
34-pin male 62-pin male

B 9 102 Signal Ground
22
23
24
25
26
27
47
31
32
52
50
C 57 105 Ready to send
D 4 106 Clear to send
E 46 107 Data mode
F 6 109 Receiver ready
H 58 108.2 Terminal ready
J 48 Reserved
P 21 103 Send data,A
R 20 104 Receive Data,A
S 42 103 Send data,B
T 41 104 Receive data,B
U 61 Transmit timing,A
V 18 115 Receive timing,A
W 60 Transmit timing,B
X 39 115 Receive timing,B
Y 19 114 Send timing,A
AA 40 114 Send timing,B

The WAN link end is 34-pin male and the Router end is a 62-pin male. The detailed pinouts for this cable can be found in the Multisite LAN section of the HP EtherTwist Technical Reference Guide (P/N: 5091-3237E) on page 3-71 If you have it or it is still available ;-}

[Mike Fisher_5]

Hi Melvyn

You mostly answered my questions but how about a reply now in two parts?

1] What do the ends actually look like?
for 10

2] What's 7500 - 7477 equal?
for 10

Mike

[melvyn burnard]

1) I have no idea what they look like, have not played with X25 for years now, but I believe the product number is J2950A or hte part number is 28606-63008
2) 42?

[Mike Fisher_5]

Melvyn sand demon
I make it 3 points to go