HPE Community
Operating System - HP-UX
1832993 Members
3237 Online
110048 Solutions
New Discussion

Re: Raptor configuration

 
SOLVED
Go to solution
Raymond F
Frequent Advisor

‎06-06-2000 08:09 AM

‎06-06-2000 08:09 AM

Raptor configuration

I am running Raptor firewall v6.0 on HPUX 11.00. I have a client that needs to connect to a remote Citrix server from behind the firewall. Does anybody know how to configure the firewall for the Citrix ICA Client to access a remote server? I have tried connecting to the Citrix server by bypassing the firewall, so I know that the firewall is not properly configured for Citrix ICA Client.
0 Kudos
Reply
3 REPLIES 3
Berlene Herren
Honored Contributor

‎06-06-2000 09:08 AM

‎06-06-2000 09:08 AM

Solution

Re: Raptor configuration

According to Raptor's site (http://www.raptor.com/cs/FAQ/eunv6faq.html)
this is set up passing via Application Proxy.

Berlene

http://www.mindspring.com/~bkherren/dobes/index.htm
Reply
Raymond F
Frequent Advisor

‎06-06-2000 10:39 AM

‎06-06-2000 10:39 AM

Re: Raptor configuration

I couldn't reach your link, Berlene. I was able to finally get it working. I created a protocol for Citrix, created a GSP service, and created a rule for it. The key was finally finding the proper port via log errors. Thanks.
0 Kudos
Reply
Berlene Herren
Honored Contributor

‎02-11-2001 05:10 AM

‎02-11-2001 05:10 AM

Re: Raptor configuration

I too, have had problems lately getting to that site. Symantec says to "keep checking." Thanks for the feedback, Raymond, and I am glad it is working.

Berlene
http://www.mindspring.com/~bkherren/dobes/index.htm
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.