Real time Measurements

[Brian Abdallah_2]

The N4000 is attached to a external disk array using Raid 1 storage (mirrored raid set). As suggested I am posting the real time measurement outputs. Please advise as you see fit. Thanks!
Real time measurements can be collected and pasted in with your next post:

sar -d 5 5
sar -u 5 5
sar -v 5 5
swapinfo ???tam
vmstat 5 5


sar -d 5 5
HP-UX B.11.00 A 9000/800 06/03/03

13:05:20 device %busy avque r+w/s blks/s avwait avserv
13:05:25 c1t2d0 2.99 0.50 4 28 5.20 6.92
c2t2d0 1.80 0.50 4 24 5.29 6.04
c4t0d1 3.19 0.50 4 64 2.79 11.12
13:05:30 c1t2d0 0.80 0.50 1 10 3.04 8.47
c2t2d0 0.60 0.50 1 8 4.47 10.71
c4t0d1 4.00 0.50 4 67 3.83 11.62
13:05:35 c1t2d0 1.20 0.50 2 16 3.56 6.52
c2t2d0 1.00 0.50 2 16 3.57 6.16
c4t0d1 1.60 0.50 2 29 1.78 9.84
13:05:40 c1t2d0 2.20 0.50 4 22 3.99 7.06
c2t2d0 1.60 0.50 3 20 4.10 5.59
c4t0d1 3.81 0.50 4 61 4.04 11.40
13:05:45 c1t2d0 2.60 0.50 5 40 4.42 6.03
c2t2d0 2.40 0.50 5 39 4.41 6.33
c4t0d1 2.20 0.50 3 48 1.92 9.86

Average c1t2d0 1.96 0.50 3 23 4.32 6.75
Average c2t2d0 1.48 0.50 3 21 4.44 6.30
Average c4t0d1 2.96 0.50 3 54 3.07 10.95

sar -u 5 5
HP-UX B.11.00 A 9000/800 06/03/03

13:09:46 %usr %sys %wio %idle
13:09:51 1 0 3 96
13:09:56 0 0 2 98
13:10:01 3 1 3 93
13:10:06 2 0 5 93
13:10:11 1 0 2 97

Average 1 0 3 95

sar -v 5 5
HP-UX B.11.00 A 9000/800 06/03/03

13:10:33 text-sz ov proc-sz ov inod-sz ov file-sz ov
13:10:38 N/A N/A 193/664 0 1991/5000 0 1561/5010 0
13:10:43 N/A N/A 193/664 0 2007/5000 0 1563/5010 0
13:10:48 N/A N/A 192/664 0 1998/5000 0 1557/5010 0
13:10:53 N/A N/A 192/664 0 1991/5000 0 1557/5010 0
13:10:58 N/A N/A 192/664 0 1885/5000 0 1555/5010 0






swapinfo -tam

Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 1024 0 1024 0% 0 - 1 /dev/vg00/lvol2
reserve - 1024 -1024
memory 1537 1106 431 72%
total 2561 2130 431 83% - 0 -



vmstat

procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
3 0 0 309892 93737 12 4 0 0 4 0 0 565 561 191 1 1 98

[harry d brown jr]

Usually I'd say: "Add more memory"

But first check

dbc_max_pct
dbc_min_pct

and make sure dbc_max_pct isn't higher than 15% and dbc_min_pct isn't lower than 5%.

live free or die
harry