Restore of Printer Config

[Martin Robinson]

Recently my system has been upgraded from HP-UX 10.20 to Hp-UX 11. I have got a copy of the root file system and a number of other files. The save Spooler option was not taken before the system was replaced. I have restored /opt/Hpnp and /var/spool/lp. Still the old config is not there. Can anyone suggest anything

[MARTINACHE]

Hi,

You should restore /etc/lp/

Then run :

/sbin/init.d/lp stop
/sbin/init.d/lp start

Regards,

Patrice

[Carlos Fernandez Riera]

there are some dirs that must be restored and synchronized:

1- install hpnp software
2- lpshut
3- restore /var/spool/lp
4- restore /etc/lp
5- restore /etc/hosts or DNS configuration.
6- try now lpsched