rp2470 boot from CD

[njia_1]

Hi

We had a second hand rp2470 and did not know what it was used for.

I tried few times to boot form CD to install HPUX 11 but everytime I boot it from CD the server automatically start a recovery shell. I do not have any chance to install HPUX.

I pulled out all the harddrives, reset GSP to all the default settings but the problem is still there.

any ides ?

thanks
Nan

[Sundar_7 · Accepted solution]

There are couple of threads on the very issue.

I think the resolution is to set the correct TERMINAL type of the console.

Edit the terminal settings of the console, change it to vt100/vt220 and give it a try again.

[Boris Sedash]

Hi.
While boot you should press
and you will avaliblae to enter boot mode Menu
In this menu run
1. SEarch
2. PAth
3. Set the BOot ALT to path that have cd-rom
4. type boot alt
it should start HP-Instalation.