Operating System - HP-UX
1823933 Members
3527 Online
109667 Solutions
New Discussion юеВ

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

 
Denis Zhuravlev
Occasional Advisor

rx8620 hp-ux boot problem after applaing patch PHKL_36143

HPUX> boot vmunix
> System Memory = 18383 MB
loading section 0
................................................ (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (bootfs) to MFS
.x..
Launching /stand/vmunix
SIZE: Text:24510K + Data:5892K + BSS:9348K = Total:39751K

Console is on a Serial Device
Booting kernel...

Sequencer: No wakeup handler is registered!
Sequencer: No wakeup handler is registered!
я┐╜я┐╜я┐╜я┐╜& я┐╜я┐╜& я┐╜
0x6d00) Reserved

я┐╜я┐╜я┐╜я┐╜& я┐╜я┐╜& я┐╜
я┐╜я┐╜eя┐╜sя┐╜ervedя┐╜& я┐╜
&
* * %я┐╜



eя┐╜rя┐╜vя┐╜edя┐╜&

я┐╜*я┐╜*&* % fя┐╜a
ult ***

St atic Gener al
Regi sters

я┐╜eя┐╜dя┐╜я┐╜&Reser
----------------------------------------------

HPUX> boot backup
Boot path is now: backup/vmunix
> System Memory = 18383 MB
loading section 0
................................................ (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (backup/bootfs) to MFS
....
Launching /stand/backup/vmunix
SIZE: Text:24510K + Data:5892K + BSS:9348K = Total:39751K

Console is on a Serial Device
Booting kernel...

Sequencer: No wakeup handler is registered!
Sequencer: No wakeup handler is registered!
@ p0 я┐╜

я┐╜ @я┐╜ p 0я┐╜я┐╜> я┐╜я┐╜@a ., я┐╜L t , я┐╜X

(я┐╜ я┐╜@>_ я┐╜я┐╜@ aя┐╜ я┐╜., P5я┐╜ Lя┐╜я┐╜ 0B tя┐╜ ,
я┐╜ @я┐╜ p 0 (я┐╜ @XHя┐╜
5 REPLIES 5
Steven E. Protter
Exalted Contributor

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

Shalom,

I would suggest booting of /stand/vmunix.prev

That file was created when the kernel was rebuilt by the patch.

You can also boot off the install media.

cd /stand

cp vmunix.prev vmunix

I'd also report the bug to HP Response center.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Denis Zhuravlev
Occasional Advisor

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

Do you read second part of my first post?

----------------------------------------------
HPUX> boot backup
....
Dennis Handly
Acclaimed Contributor

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

>Do you read second part of my first post?

It helps if you have some narrative to go along with the commands you used.
Anshumali
Esteemed Contributor

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

If you really want to say that previous kernel is not allowing to boot as well and giving you the same error. I will not call it caused by the kernel patch. How you compiled it?
Dreams are not which you see while sleeping, Dreams are which doesnt allow you to sleep while you are chasing for them!!
Denis Zhuravlev
Occasional Advisor

Re: rx8620 hp-ux boot problem after applaing patch PHKL_36143

>If you really want to say that previous kernel is not allowing to boot as well and giving you the same error.
Yes, with previous kernel same error.

>I will not call it caused by the kernel patch. How you compiled it?
I execute swinstall -s /pathtopatch -x autoreboot=true \*

May be problem with disk? But command ls from bootloader show /stand contains and others dirs.