RX8620 server with Vpar Network issue

[Dharmu]

Dear all,

I have RX8620 with 2 Vpar's running.For cluster configuration if i try to configure lan1.Automatically it kills lan0.Kindly help me out if any body saw the same.

Details :- Lan0 -- Onboard system core I/O

Lan1 -- Combo card with FC port
cum Lan port.

Best Regards
Dharmu

[melvyn burnard]

some further information would help here!

How about telling us if they are in the same vpar, and what the lan0 is set to, along with what exactly you are doing to lan1, what OS version you are using etc?

[Dharmu]

Hi ,

HPUX 11.23 running in that server.And Lan0 was configured for public.Now iam trying to configure Lan1 for cluster heart beat.

Regds
Dharma

[HGN]

Hi

Pl read the forum guidelines ina ssigning points , you have not assigned points to any of the 18 answers for your queries.

Rgds

HGN

[melvyn burnard]

Again I ask for details.
are these two LAN's in the same Vpar?
If so how is lan0 configured (GIVE DETAILS)
and what commands are you using and what settings are yo trying to apply to lan1 (GIVE DETAILS)
When you say it kills lan0, please give details.