HPE Community
Operating System - HP-UX
1830931 Members
2131 Online
110017 Solutions
New Discussion

Re: sam privileges configuration

 
Dakka
Occasional Contributor

‎04-11-2002 12:13 PM

‎04-11-2002 12:13 PM

sam privileges configuration

Is it possible to configure SAM Functions privileges to non root user only by online command or by modifying config files.

I know how to do it by using sam -r
In the wayt to perfect the system
0 Kudos
Reply
1 REPLY 1
Sridhar Bhaskarla
Honored Contributor

‎04-11-2002 12:25 PM

‎04-11-2002 12:25 PM

Re: sam privileges configuration

Hi,

There is no command to do this. But you can copy
/etc/sam/custom/default.cp as /etc/sam/custom/user.cf

Edit user.cf to make changes. But I would suggest you use SAM for the first time.

Or you can modify a user on one system and copy the corresponding file to other systems without having to invoke sam again.

-Sri
You may be disappointed if you fail, but you are doomed if you don't try
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.