Sam will not run

[Otto Folprecht]

Hi folks,

Got this message after trying to start sam on the system. Any ideas? THX Otto
OS 11.11

/usr/lib/dld.sl: Call to mmap() failed - TEXT /usr/lib/librwtool.2
/usr/lib/dld.sl: Not enough space
/usr/sbin/sam[220]: 3681 Abort(coredump)

[Darrel Louis]

Otto,

It looks like you've a full filesystem.

run bdf or dmesg.

Darrel

[Otto Folprecht]

with bdf I have tones of space with dmesg i get this:

Feb 22 16:20
...
CE: autofs_link(): File system was registered at index 3.
NOTICE: cachefs_link(): File system was registered at index 5.
NOTICE: nfs3_link(): File system was registered at index 6.
255/255 swspBus
1 cell
1/0 sba
1/0/0 lba
1/0/0/0/0 func0
1/0/0/0/1 asio0
c8xx BUS: 5 SCSI C1010 Ultra160 Wide LVD A6793-60001 assigned CPU: 1
1/0/0/3/0 c8xx
1/0/0/3/0.6 tgt
1/0/0/3/0.6.0 sdisk
1/0/0/3/0.7 tgt
1/0/0/3/0.7.0 sctl
c8xx BUS: 6 SCSI C1010 Ultra Wide Single-Ended A6793-60001 assigned CPU: 2
1/0/0/3/1 c8xx
1/0/0/3/1.2 tgt
1/0/0/3/1.2.0 sdisk
1/0/0/3/1.7 tgt
1/0/0/3/1.7.0 sctl
1/0/1 lba
1/0/1/0/0 PCItoPCI
c8xx BUS: 7 SCSI C1010 Ultra160 Wide LVD assigned CPU: 3
1/0/1/0/0/1/0 c8xx
1/0/1/0/0/1/0.7 tgt
1/0/1/0/0/1/0.7.0 sctl
c8xx BUS: 8 SCSI C1010 Ultra160 Wide LVD assigned CPU: 0
1/0/1/0/0/1/1 c8xx
1/0/1/0/0/1/1.6 tgt
1/0/1/0/0/1/1.6.0 sdisk
1/0/1/0/0/1/1.7 tgt
1/0/1/0/0/1/1.7.0 sctl
1/0/1/0/0/4/0 igelan
1/0/2 lba
1/0/2/0/0 td
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 1/0/2/0/0
1/0/2/0/0.1 fcp
1/0/2/0/0.1.17.0.0 fcparray
1/0/2/0/0.1.17.0.0.0 tgt
1/0/2/0/0.1.17.0.0.0.0 sctl
1/0/2/0/0.1.17.0.0.0.1 hsx
1/0/2/0/0.1.17.255.0 fcpdev
1/0/2/0/0.1.17.255.0.0 tgt
1/0/2/0/0.1.17.255.0.0.0 sctl
1/0/2/0/0.1.18.0.0 fcparray
1/0/2/0/0.1.18.0.0.0 tgt
1/0/2/0/0.1.18.0.0.0.0 sctl
1/0/2/0/0.1.18.0.0.0.1 hsx
1/0/2/0/0.1.18.255.0 fcpdev
1/0/2/0/0.1.18.255.0.0 tgt
1/0/2/0/0.1.18.255.0.0.0 sctl
1/0/4 lba
1/0/4/0/0 td
td: claimed Tachyon XL2 Fibre Channel Mass Storage card at 1/0/4/0/0
CPQswsp: Availability for LUN 600508B40000C1F40003600000090000 changed to Alive
1/0/4/0/0.1 fcp
1/0/4/0/0.1.17.0.0 fcparray
1/0/4/0/0.1.17.0.0.0 tgt
1/0/4/0/0.1.17.0.0.0.0 sctl
1/0/4/0/0.1.17.0.0.0.1 hsx
1/0/4/0/0.1.17.255.0 fcpdev
1/0/4/0/0.1.17.255.0.0 tgt
1/0/4/0/0.1.17.255.0.0.0 sctl
1/0/4/0/0.1.18.0.0 fcparray
1/0/4/0/0.1.18.0.0.0 tgt
1/0/4/0/0.1.18.0.0.0.0 sctl
1/0/4/0/0.1.18.0.0.0.1 hsx
1/0/4/0/0.1.18.255.0 fcpdev
1/0/4/0/0.1.18.255.0.0 tgt
1/0/4/0/0.1.18.255.0.0.0 sctl
1/0/6 lba
c8xx BUS: 9 SCSI C1010 Ultra160 Wide LVD A6828-60101 assigned CPU: 3
1/0/6/0/0 c8xx
1/0/6/0/0.2 tgt
1/0/6/0/0.2.0 stape
1/0/6/0/0.7 tgt
1/0/6/0/0.7.0 sctl
1/0/8 lba
1/0/10 lba
1/0/12 lba
1/0/12/0/0 btlan
1/0/14 lba
1/0/14/0/0 btlan
1/5 memory
1/10 processor
1/11 processor
1/12 processor
1/13 processor
255/255/0 swsp
255/255/0/0 tgt
255/255/0/0.0 sdisk

System Console is on the Built-In Serial Interface
igelan3: INITIALIZING HP A6794-60001 PCI 1000Base-T at hardware path 1/0/1/0/0/4/0
btlan: Initializing 10/100BASE-TX card at 1/0/12/0/0....
btlan: Initializing 10/100BASE-TX card at 1/0/14/0/0....
Entering cifs_init...
Initialization finished successfully... slot is 9
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 10485760
Dump device table: (start & size given in 1-Kbyte blocks)
entry 0000000000000000 - major is 31, minor is 0x56000; start = 527200, size = 5242880
Starting the STREAMS daemons-phase 1
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: vw: -proj selectors: CUPI80_BL2000_1108 -c 'Vw for CUPI80_BL2000_1108 build' -- cupi80_bl2000_1108 'CUPI80_BL2000_1108' Wed Nov 8 19:24:56 PST 2000 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 10452992 Kbytes, lockable: 9634324 Kbytes, available: 9148536 Kbytes

CPQswsp: Path c10t0d1 Failed (LUN 600508B40000C1F40003600000090000 Controller P4889B59IM604Z Array 50001FE15000BB90 HBA td3)
CPQswsp: Path c14t0d1 Failed (LUN 600508B40000C1F40003600000090000 Controller P4889B59IM604Z Array 50001FE15000BB90 HBA td2)
CPQswsp: Availability for LUN 600508B40000C1F40003600000090000 changed to Critical
CPQswsp: Availability for LUN 600508B40000C1F40003600000090000 changed to Reduced
CPQswsp: Availability for LUN 600508B40000C1F40003600000090000 changed to Alive
LPMC type : I-Cache Parity Error.

[Jeff Schussele · Accepted solution]

Hi Otto,

To me this looks like a memory constraint - so either:

1) You're out of memory - unlikely
2) You've run out of swap *reservation* space - more likely
3) You've hit a max?siz kernel parm limit - a little more likely
4) You've hit a shm??? kernel parm limit - most likely IMO

HTH,
Jeff

[Darrel Louis]

Otto,

Jeff is wright:
The HP-UX kernel has a default stack size of 8MB(?) per process. You need to extend maxssiz and recompile the kernel (and reboot). While at it, check out the maxdsiz parameter for the maximum amount of data a program can use. It depends on your applications, if the default of 64MB is enough or not.

Darrel