Scsci Bus mode.

[shanmuhanandam]

Hi,

#mptconfig /dev/mpt2

Scan For Devices ...

---- ADAPTER INFORMATION -----------------------------------------------------
Device File : /dev/mpt2

Hardware Path : 3/0/8/1/0

---- BUS PARAMETERS ----------------------------------------------------------

Initiator SCSI ID : 5

SCSI Bus Rate : Ultra160

SCSI Bus Width : Wide



---- CHANNEL CAPABILITIES ----------------------------------------------------



Req/Ack Offset : 127

Bus Mode : Single Ended

Quick Arbitration Selection : Enabled

DT Clocking : Enabled

Packetized : Enabled



---- TARGET PARAMETERS -------------------------------------------------------

Target Description Firmware In Use In Use

Id Version Rate Width

------------------------------------------------------------------------------

0 ST3146707LC HPC2 Ultra Narrow


i need to change the scsi bus mode from single ended to LVD. so how can i change that one?
Regards,
Shanmugam.

[Torsten.]

Please specify the model of the disk chassis and post an

# ioscan -fn
# mptconfig /dev/mpt2
(complete)
# mptutil /dev/mpt2