HPE Community
Operating System - HP-UX
1838741 Members
3872 Online
110129 Solutions
New Discussion

Re: SCSI reset on itanium

 
gigiz
Valued Contributor

‎03-27-2006 08:27 PM

‎03-27-2006 08:27 PM

SCSI reset on itanium

Hallo ,
i have a
2 itanium rx1620
1 MSA30 scsi

The problem is that on the server the disk not be found .In the syslog i have " SCSI reset".
If i disconnect by the scsi one server the disk are found ...
I think that is SCSI ID problem ....
but how i change a SCSI ID on EFI shell ??
0 Kudos
4 REPLIES 4
Muthukumar_5
Honored Contributor

‎03-27-2006 08:30 PM

‎03-27-2006 08:30 PM

Re: SCSI reset on itanium

http://docs.hp.com/en/AB430-96005/ch04s03.html

--
Muthu
Easy to suggest when don't know about the problem!
0 Kudos
Torsten.
Acclaimed Contributor

‎03-27-2006 10:52 PM

‎03-27-2006 10:52 PM

Re: SCSI reset on itanium

You can also boot the Smart Setup CD and set the values:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=is-38986-1&jumpid=reg_R1002_USEN

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Torsten.
Acclaimed Contributor

‎03-27-2006 10:56 PM

‎03-27-2006 10:56 PM

Re: SCSI reset on itanium

BTW, what kind of MSA30 you have?

Only the MI option is supported for multiple SCSI controllers.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
gigiz
Valued Contributor

‎03-28-2006 02:06 AM

‎03-28-2006 02:06 AM

Re: SCSI reset on itanium

The solution is
mtpconfig -i scsi_id /dev/...
it's modify scsi_id online

OK

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.