HPE Community
Operating System - HP-UX
1836580 Members
1845 Online
110102 Solutions
New Discussion

Re: SCSI: Ultra160 Controller at 1/0/0/3/1: Error:

 
qiang.zhu
New Member

‎07-16-2007 02:41 PM

‎07-16-2007 02:41 PM

SCSI: Ultra160 Controller at 1/0/0/3/1: Error:

查看系统日志.发现有ERROR
SCSI: Ultra160 Controller at 1/0/0/3/1: Error: The domain validation test for target 1 determined that communication may not be possible to this target. Verify the hardware configuration.

查 ioscan -H

1/0/0/3/1 下面连接的是tape .

0 Kudos
Reply
1 REPLY 1
Sandman!
Honored Contributor

‎07-16-2007 04:22 PM

‎07-16-2007 04:22 PM

Re: SCSI: Ultra160 Controller at 1/0/0/3/1: Error:

From your post it looks like the tape unit at H/W path 1/0/0/3/1 is bad. Make sure that cables, termination and HBA are ok before replacing any defective parts.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.