Secure Path Problem

[Victor Burguillos_4]

Hi
I have a problem when I try run spmgr command show the following message and don't show de lun's information:

tca068:/> spmgr display
Server: tca068 Report Created: Wed, Mar 14 10:11:09 2007
Command: spmgr display


Please anybody help me?

VB

[Tommy_6]

when you do an ioscan, do you see your HBA's?

[Sameer_Nirmal]

Do you see the command failed message?

There is a startup script for SP /sbin/init.d/spinit . Check its log in rc.log or syslog for the command failure.

Is this new SP installation? What is SP version? Did you apply required patches for the SP version prior to its installation?
OS version ? FC HBA, and its driver?

Are there alternate devices in vg00?

[Dave Hutton]

Like stated above, is the agent running?

Also if its a new install I know that after you install securepath it usually requires a reboot. Which is normal.

But if I present the first lun to the server it doesn't show up until I've rebooted the server a second time.

Also is zoning properly set up on your san switches?