semmns maximum value

[Venkat_11]

Hi,

I have HP rp4440 server running hpux 11i version1 and i am trying to increase that value to 100000 and i am getting the following error.

The value specified for tunable parameter "semmns", "100000", │ │
││ │ evaluates to "100000" which is more than the maximum allowed value of │ │
││ │ "32767".



But HP docs mentioned like this.

NAME
semmns — number of System V IPC system-wide semaphores

VALUES

Failsafe
4096

Default
4096

Allowed values
Minimum: semmni

Maximum: 335534080

Please let me know if there any dependency values for semmns which are effecting increase of semmns.


Please advice.

Thanks and Regards
Venkat

[Paul Sperry]

mine is set at smmin*2

So maybe try setting your smmni to 50000
Then set semmsn to (smmin*2)

[Don Morris_1 · Accepted solution]

You must be reading docs for v2 or v3. v1's man page states:

NAME

semmns - number of System V IPC system-wide semaphores
VALUES

Failsafe

128
Default

128
Allowed values

Minimum: 2

Maximum: 32767

(http://docs.hp.com/en/TKP-90202/re80.html)

That's stock 11iv1, you can install PHKL_28703 which raises the limit to 1000000.

[Venkat_11]

Thanks DON.

Regards
Venkat

[Venkat_11]

semmns max value is 32,767 for HPUX 11i Version 1 and 335534080 is maximum value for Version2 and Version3.



We can increase value to 335534080 on version 1 by applying patch PHKL_28703



Please go through the description for the patch.



http://www11.itrc.hp.com/service/patch/patchDetail.do?patchid=PHKL_28703&sel={hpux:11.11,}&BC=main|search|