Setup of Ignite Server

[Joseph C. Denman]

Hi all,

I have a test lab with about 10 or so L-Class servers that I have to rebuild/load on a regular basis. I think setting up an ignite server would definatly speed up the process. However, I have never attempted this. Does anyone have any good reference material or config examples.

Any input is appreciated.

Thanks,

...jcd...

[Jeff_Traigle · Accepted solution]

Ignite-UX Administration Guide can be found on the following page. It's very useful.

http://docs.hp.com/hpux/os/11i/index.html

[Sridhar Bhaskarla]

Hi,

It's easy. Once Ignite is installed, run '/opt/ignite/bin/ignite' and it will run setup automatically. It's easy but you have to remember quite a few things.

Document below is *the* guide on Ignite.

http://docs.hp.com/hpux/onlinedocs/B2355-90837/B2355-90837.html

-Sri

[Bernhard Mueller]

Joseph,

if you do not like reading instructions first, you could just
download the Version 5.4 from
http://software.hp.com/products/IUX

swinstall it on all machines

run the ignite gui on the ignite server (ignite)

;-)
Regards,
Bernhard