setup virtualisation

[mulder20]

Hello ,
please i have some question :
i have an hp integrety server and i want to install hpux 11i and install windows 2003 like a virtual machine

Please could you give me the step to do that ?

step 1 :i have already install hpux 11i V31
please what's the next step ?
thank you for your help,
Mulder

[Kenan Erdey]

hi,

this document may help you:

http://docs.hp.com/en/T2767-90067/index.html

Kenan.

[Torsten.]

At the moment HP Integrity Virtual Machines is only running on 11.23.
11.31 is not supported yet - be patient.

With 11.23 you should use the manual from the link above.

[Vivek Bhatia · Accepted solution]

Hi Mulder,

Right now you need to use the HP-UX 11.23 as 11.31 doesnot support virtualisation.

Then Follow the following steps:
1. Create a virtual switch using
#hpvmnet -c -S vswa -n 0
2.Create a Virtual machine
# hpvmcreate -P VM1 -r 10G -c 2
Then follow the document

http://docs.hp.com/en/T2767-90105/T2767-90105.pdf

-Vivek Bhatia

[Rita C Workman]

Here's some documentation I wrote for training other admin here. Note it refers to our server names, etc., so change for your own. No guarantees....

Rgrds,
Rita

[Geoff Wild]

http://www.met.ca/itrc/index.php?option=com_content&task=view&id=98&Itemid=2

To create a Windows guest:

http://docs.hp.com/en/T2767-90067/ch05.html

Rgds...Geoff

[mulder20]

Please a question ,
is there an interface like an interface web to configure (create , display , modify ....) the VM guest or just by hpux command ?

.
Now i'm reinstalling the server with HPUX 11iV23 as you suggest .

Thanks for advices,
Mulder

[Vivek Bhatia]

Hi Mulder,

No till now no web interface has been designed to create , modify the VM Guest.

Thanks
-Vivek Bhatia

[mulder20]

I finish the hpux installation .

i see in the this software is required :

The Integrity VM release media kit contains the following software:
â ¢ T2767AC (the Integrity VM software bundle)
â ¢ VMProvider (allows you to use the HP Integrity VM Manager to manage the VM Host)
â ¢ HP-UX 11i V2 (the HP-UX 11.23 foundation operating environment [FOE] that is provided
for the VM Host system)
â ¢ PRM-Sw Krn (installed as part of the HP-UX FOE and required by Integrity VM)
â ¢ VMGuestLib (installed as part of the HP-UX FOE and required by Integrity VM)
â ¢ B8465BA (HP WBEM Services for HP-UX, installed as part of the FOE and required by
Integrity VM)


should download this software from HP website ?
or it's on OS DVD ?

thanks for advices,

Mulder

[Torsten.]

Should all be on the install or appl. DVD, but if you download, you will probably get newer versions.

[mulder20]

I install HP VSE suite , but i can't run any command of hpvmXXX ...


# hpvminfo
sh: hpvminfo: not found.

is ther an other product to install ?
thanks for advises

Mulder

[Geoff Wild]

Actually - you can create a guest from a web based GUI - using System Insight Manager.

Rgds...Geoff

[mulder20]

now it's running
# hpvminfo
hpvminfo: Running on an HPVM host.


please wich GUI do you mean ?

Thanks,

Mulder

[Torsten.]

Is the T2767AC product installed.

Any files in /opt/hpvm ?

Check with swlist!

[mulder20]

please i create my vm win1 , but i get those error :


# hpvmcreate -P win1 -O windows -c 1 -r 2G \
> -a disk:scsi::disk:/dev/rdsk/c3t2d0 \
> -a dvd:scsi::disk:/dev/rdsk/c0t0d0 \
> -a network:lan::vswitch:switch1
hpvmcreate: WARNING (host): The vswitch 'switch1' does not exist.
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item switch1: Vswitch 'switch1' does not exist.
These problems may prevent HPVM guest win1 from starting.
hpvmcreate: The creation process is continuing.
# hpvmstatus
[Virtual Machines]
Virtual Machine Name VM # OS Type State #VCPUs #Devs #Nets Memory Runsysid
==================== ===== ======= ========= ====== ===== ===== ======= ========
win1 4 WINDOWS Off 1 2 1 2 GB 0
# hpvmconsole -P win1 -fi -c "pc -on"


vMP MAIN MENU

CO: Console
CM: Command Menu
CL: Console Log
SL: Show Event Logs
VM: Virtual Machine Menu
HE: Main Help Menu
X: Exit Connection

[win1] vMP> pc -on

System will be powered on.

-> System is being powered on.

Please wait for the guest start sequence to complete. Use of the attention
character can prevent the guest from running.
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item switch1: Vswitch 'switch1' does not exist.
These problems may prevent HPVM guest win1 from starting.
hpvmstart: Unable to continue.

-> Command failed.

[win1] vMP> CO



(Use Ctrl-B to return to vMP main menu.)



- - - - - - - - - - Prior Console Output - - - - - - - - - -

- - - - - - - - - - - - Live Console - - - - - - - - - - - -


please have any idea what's was the problems

thanks for advice

[Torsten.]

The problem is clearly written on the screen.

hpvmcreate: WARNING (host): The vswitch 'switch1' does not exist.

HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.


>> does not exist <<

[mulder20]

yes i see the message :
i want to modify the VM but still give this warning :

# hpvmmodify -P win1 -a dvd:scsi::disk:/dev/rdsk/c0t1d0
HPVM guest win1 configuration problems:
Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item /dev/rdsk/c0t1d0: '/dev/rdsk/c0t1d0' backing device does not exist.
Warning 3 on item switch1: Vswitch 'switch1' does not exist.

i don't know why they cant create disk ?

Thanks for advices
Mulder

[Torsten.]

Run on the host:

# hpvmnet
# ioscan -fn

and post the results.

[mulder20]

Hello,

# hpvmnet
Name Number State Mode NamePPA MAC Address IP Address
======== ====== ======= ========= ======== ============== ===============
localnet 1 Up Shared N/A N/A
vswitch 2 Up Shared lan0 0x001cc4fbace7 192.168.100.212
clan1 3 Down Shared lan1
#
# ioscan -fn
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================================
root 0 root CLAIMED BUS_NEXUS
ioa 0 0 sba CLAIMED BUS_NEXUS System Bus Adapter (4030)
ba 0 0/0 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
tty 0 0/0/1/0 rmp3f01 CLAIMED INTERFACE PCI class(255,0) (103c1303)
tty 1 0/0/1/1 rmp3f01 CLAIMED INTERFACE PCI SimpleComm (103c1302)
tty 2 0/0/1/2 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/diag/mux2 /dev/mux2 /dev/tty2p0
OO 0 0/0/2/0 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 1 0/0/2/0.0 UsbMiniBus CLAIMED INTERFACE USB Composite Device
OO 2 0/0/2/0.0.0 UsbBootKeyboard CLAIMED DEVICE Virtual Keyboard
unknown -1 0/0/2/0.0.1 UNCLAIMED UNKNOWN OO Device Driver
unknown -1 0/0/2/0.1 UNCLAIMED UNKNOWN OO Device Driver
OO 3 0/0/2/1 UsbOhci CLAIMED INTERFACE USB OHCI Interface
OO 4 0/0/2/1.0 UsbMiniBus CLAIMED INTERFACE USB Composite Device
OO 5 0/0/2/1.0.0 UsbBulkOnlyMS CLAIMED DEVICE USB Bulk Only
ext_bus 0 0/0/2/1.0.16 UsbScsiAdaptor CLAIMED INTERFACE USB SCSI Stack Adaptor
target 0 0/0/2/1.0.16.0 tgt CLAIMED DEVICE
disk 2 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-V
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
target 1 0/0/2/1.0.16.7 tgt CLAIMED DEVICE
ctl 1 0/0/2/1.0.16.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
OO 6 0/0/2/2 UsbEhci CLAIMED INTERFACE USB EHCI Interface
graphics 0 0/0/3/0 gvid_core CLAIMED INTERFACE PCI Display (1002515e)
ba 1 0/1 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (122e)
escsi_ctlr 0 0/1/1/0 sasd CLAIMED INTERFACE HP PCI/PCI-X SAS MPT Adapter
/dev/sasd0
ext_bus 1 0/1/1/0.0.0 sasd_vbus CLAIMED INTERFACE SAS Device Interface
target 2 0/1/1/0.0.0.0 tgt CLAIMED DEVICE
disk 1 0/1/1/0.0.0.0.0 sdisk CLAIMED DEVICE HP DG072BB975
/dev/dsk/c1t0d0 /dev/rdsk/c1t0d0
/dev/dsk/c1t0d0s1 /dev/rdsk/c1t0d0s1
/dev/dsk/c1t0d0s2 /dev/rdsk/c1t0d0s2
/dev/dsk/c1t0d0s3 /dev/rdsk/c1t0d0s3
lan 0 0/1/2/0 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
lan 1 0/1/2/1 igelan CLAIMED INTERFACE HP PCI-X 1000Base-T Dual-port Built-in
ba 2 0/2 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 3 0/2/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
ba 4 0/3 lba CLAIMED BUS_NEXUS Local PCI-X Bus Adapter (12ee)
unknown -1 0/3/1/0 UNCLAIMED UNKNOWN PCI-X SerialBus (10772422)
ba 5 0/4 gh2p CLAIMED BUS_NEXUS Local Bus Adapter
ba 6 0/4/0/0 PCItoPCI CLAIMED BUS_NEXUS PCItoPCI Bridge
processor 0 120 processor CLAIMED PROCESSOR Processor
processor 1 121 processor CLAIMED PROCESSOR Processor
ba 7 250 pdh CLAIMED BUS_NEXUS Core I/O Adapter
ipmi 0 250/0 ipmi CLAIMED INTERFACE IPMI Controller
/dev/ipmi
tty 3 250/1 asio0 CLAIMED INTERFACE Built-in RS232C
/dev/diag/mux3 /dev/mux3 /dev/tty3p0
acpi_node 0 250/2 acpi_node CLAIMED INTERFACE Acpi Hardware
#

Thanks for advices
Mulder

[Torsten.]

>> Warning 3 on item switch1: Vswitch 'switch1' does not exist

Correct! You have the following:

localnet 1 Up
vswitch 2 Up
clan1 3 Down

>> Warning 1 on item /dev/rdsk/c3t2d0: '/dev/rdsk/c3t2d0' backing device does not exist.
Warning 2 on item /dev/rdsk/c0t1d0: '/dev/rdsk/c0t1d0' backing device does not exist.

Correct!

Your "real" DVD drive is

disk 2 0/0/2/1.0.16.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-V
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0

[mulder20]

When i try to add Disk in my VM i get this error , please have any idea how can i resolve it ?


# hpvmmodify -P win1 -a disk:scsi::disk:/dev/rdsk/c0t0d0

hpvmmodify: WARNING (win1): Disk or disk partition: /dev/rdsk/c0t0d0 has a size of zero, and may not show up in or be usable by the guest when booted.
hpvmmodify: ERROR (win1): Duplicate backing device '/dev/rdsk/c0t0d0'.
hpvmmodify: ERROR (win1): Unable to add device '/dev/rdsk/c0t0d0'.
hpvmmodify: Unable to create device disk:scsi::disk:/dev/rdsk/c0t0d0.
hpvmmodify: Unable to modify the guest.


Thanks,
Mulder

[Torsten.]

It is already assigned to win1.

Post

# hpvmstatus -P win1

[mulder20]

Thanks for your quick answers,
i try to install windows 2003 and they stop on step when they didn't find any hard drive to install win 2003,

#hpvmstatus -P win1
[Virtual Machine Details]
Virtual Machine Name VM # OS Type State
==================== ===== ======= ========
win1 4 WINDOWS Off

[Authorized Administrators]
Oper Groups:
Admin Groups:
Oper Users:
Admin Users:

[Virtual CPU Details]
#vCPUs Entitlement Maximum
====== =========== =======
1 10.0% 100.0%

[Memory Details]
Total Reserved
Memory Memory
======= ========
2 GB 64 MB

[Storage Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
disk scsi 0 0 0 0 0 disk /dev/rdsk/c3t2d0
dvd scsi 0 0 0 1 0 disk /dev/rdsk/c0t0d0
dvd scsi 0 0 0 2 0 disk /dev/rdsk/c0t1d0
disk scsi 0 0 0 3 0 disk /dev/rdsk/c4t0d1

[Network Interface Details]
Interface Adaptor Name/Num PortNum Bus Dev Ftn Mac Address
========= ========== ========== ======= === === === =================
vswitch lan switch1 1 0 1 0 5a-34-33-3e-c0-5f

[Misc Interface Details]
Guest Physical
Device Adaptor Bus Dev Ftn Tgt Lun Storage Device
======= ========== === === === === === ========= =========================
serial com1 tty console



Thanks,
Mulder

[Torsten.]

This is what you have assigned:

disk scsi 0 0 0 0 0 disk /dev/rdsk/c3t2d0
dvd scsi 0 0 0 1 0 disk /dev/rdsk/c0t0d0
dvd scsi 0 0 0 2 0 disk /dev/rdsk/c0t1d0
disk scsi 0 0 0 3 0 disk /dev/rdsk/c4t0d1


But /dev/rdsk/c0t0d0 is the only one existing device.

Of course the guest cannot find any disk - there is nothing!

I can see only 1 HDD in your ioscan - this is used for the host.


Where do you want to put the guest vdisk???

[mulder20]

Please should install a new drive to install my guest windows , or can i use the same host drive ?
The host disk is about 73 GB

Thanks,