sg cluster package does not activate the vg

[Jesus_51]

Hello,

I am having a problem forming a package on a cluster of sg 11.20.
I have two guest servers (IVM) on different servers rx2880.
I have two disks, one of 1.2 Tb for 1Gb data and another for a quorum.
At 1.2 Tb disk I created a vg, their lvols and fs.

I created and implemented the new package created, and when I try to run, not up or ip or the fs. The vg nor active.

I have created the file .conf and .cntl by my packages.

Any ideas ?

Thanks

[Matti_Kurkela]

Have you looked at the package log at /var/adm/cmcluster/log/<packagename>.log?

Please show your package configuration file and the package log (or at least the relevant parts of each, if you must protect some of the information within). Without them, the only way to figure out the problem is to blindly guess, and that is neither efficient nor interesting.

[Jesus_51]

Thanks for four repply Matti.

I have resolv the problem. the problem was in the configuration of the filesystem at the package file.