1836648 Members
2039 Online
110102 Solutions
New Discussion

shutdown ServiceGuard

 
Chung
Occasional Contributor

shutdown ServiceGuard

We have rp3440 with serviceguard, we want shutdown the active temporarily and connect tape drive for backup, how can I shutdown the active temporarily, thanks.
4 REPLIES 4
Adisuria Wangsadinata_1
Honored Contributor

Re: shutdown ServiceGuard

Hi,

You dont need to shutdown the cluster for only connect the tape drive, just need the steps like below :

ex. you would like to connect the tape drive on node_A (the active package is package_A).

1. stop the package

# cmhaltpkg -n node_A -v package_A

2. run the package on node_B

# cmrunpkg -n node_B -v package_A

3. check whether the package runs properly on node_B

4. shutdown the node_A

You can try to add the tape drive online. But if doesnt work, you still need to shutdown the node_A for troubleshooting

5. startup the node_A

6. check whether the tape drive can be work properly on the node_A, do test backup & restore

7. stop the package_A on node_B

# cmhaltpkg -n node_B -v package_A

8. start the package_A on node_A

# cmrunpkg -n node_A -v package_A

9. check whether the package_A up & running as per normal

Hope this information can help you.

Cheers,
AW
now working, next not working ... that's unix
Rajesh SB
Esteemed Contributor

Re: shutdown ServiceGuard

Hi,

Here are the steps to shutdown active package.

To Halt the package:
# cmhaltpkg -v

To Halt the node :
# cmhaltnode

OR

If you want to halt the cluster:

1. Ensure package is halted by
# cmviewcl
If not halted halt it by # cmhaltpkg
2. Halt the cluster:
# cmhaltcl

Connect the Tape drive and scan for the drive:

# insf -e -C tape
# ioscan -fnC tape
Once the tape device detected. bring up the cluster and package by

# cmruncl
Verify the package also up..
# cmviewcl
If not, start the package by
# cmmodpkg -e

Regards,
Rajesh
Ranjith_5
Honored Contributor

Re: shutdown ServiceGuard

Hi,

If you can arrange an external drive no need of shuttin down the server. Else you can do the following.

#cmhaltpkg -v
#cmhaltpkg -v
#cmhaltcl

Now shutdown the active node with
#shutdown -ry 0


Regards,
Syam
Ranjith_5
Honored Contributor

Re: shutdown ServiceGuard

dont miss to shutdown any database before shutting down the server incase the oracle shutdown is not configured in the package control script.

Regards,
Syam