Slow Connection !

[Ivan Azuara]

Again my configurations !

#netstat -rn

Routing tables
Dest/Netmask Gateway Flags Refs Use Interface Pmtu
127.0.0.1 127.0.0.1 UH 0 76264 lo0 4136
130.10.16.8 130.10.16.8 UH 0 53830 lan2 4136
130.10.17.8 130.10.17.8 UH 0 12575 lan1 4136
190.50.10.8 190.50.10.8 UH 0 0 lan0 4136
190.50.0.0 190.50.10.8 U 2 0 lan0 4352
130.10.0.0 130.10.16.8 U 2 0 lan2 1500
130.10.0.0 130.10.17.8 U 2 0 lan1 1500
127.0.0.0 127.0.0.1 U 0 0 lo0 4136
default 130.10.17.241 UG 0 0 lan2 1500

Very strange !, but my /etc/rc.config.d/netconf file is right.

netconf file :
**************

INTERFACE_NAME[0]=lan0
IP_ADDRESS[0]=190.50.10.8
SUBNET_MASK[0]=255.255.0.0
BROADCAST_ADDRESS[0]=190.50.255.255
INTERFACE_STATE[0]=up
DHCP_ENABLE[0]=0

INTERFACE_NAME[1]=lan1
BROADCAST_ADDRESS[1]=130.10.255.255
INTERFACE_STATE[1]=up
DHCP_ENABLE[1]=0
IP_ADDRESS[2]=130.10.16.8
SUBNET_MASK[2]=255.255.0.0

INTERFACE_NAME[2]=lan2
BROADCAST_ADDRESS[2]=130.10.255.255
INTERFACE_STATE[2]=up
DHCP_ENABLE[2]=0

The speed of my LANICS:

# lanadmin -s 0
Speed = 100000000
# lanadmin -s 1
Speed = 10000000
# lanadmin -s 2
Speed = 100000000

(I thin??k that my problem is not the speed, isn??t it ?)


Thank??s and sorry about a lot of questions, but your points of view are very valious for me !. Because I can probe each recomendation.


Best Regards !

[Helen French]

Hi Ivan:

I don't think the netconf file is right ! where is the IP_ADDRESS of lan1 ? It will be a best practise if you would define one network card in one session:

INTERFACE_NAME[0]=lan0
...parameters
#
#
INTERFACE_NAME[1]=lan1
....parameters
#
#
INTERFACE_NAME[2]=lan2
...parameters ...

HTH,
Shiju

[pap]

I think the IP address is missing in interface 3 configuration details.

Check for that.

-pap