snmp source ip address

[Mali_2]

Hi,
I have multiple NIC's and IP addresses on HP-UX server. How to define which IP address will be used as source IP address in snmp traps. I can't see that this is configurable in snmpd.conf

Thank you

[Jupinder Bedi]

can you please check the output of the following command and check if it is installed or not.

swlist -l product |grep -i snmp

[Mali_2]

yes, it is instaled.
OVSNMPAgent B.11.23 HP-UX_SNMP_Agent_Product

[Maxim Revutskiy]

IMHO. It's depend on routing table and destination ip address

[Johnson Punniyalingam]

simple "ping" from "SNMP" Server will also help you figure out which IP address.

basically it would depends on /etc/hosts

[Mali_2]

Thank you for answers but it is not related to routing. It could be something with /etc/hosts but it is not documnted at all. Problem is that I can't change hosts file because of another apllication on server.

[Johnson Punniyalingam]

>>Problem is that I can't change hosts file because of another apllication on server.<<< ?

you refering to which Server ? the multpile "NIC's ? or the SNMP ?

[Mali_2]

Server which have to send traps to monitoring system.