SNMP

[CowBoy]

Dear All
I need to configure My HP-UX 11.31 to be monitord by solarwinds for monitoring CPU/RAM/IO usage but i am not so familiar with snmp so what should i do to configure the snmp agent in my hp-ux mcio 11.23

[Roberto Arias]

Hi Cowboy:

You must configure the comunnity. please check /etc/snmopd.conf for update rocommunity. Is not recommended public because is the community by default.

Then you mast restar snmpd with /sbin/init.d/snmpd stop && /sbin/init.d/snmpd start

[Ganesan R]

Hi CowBoy,

Refer this on how to start SNMP service.

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1312264

[CowBoy]

Hi
I did this before but i still can not telnet to my server on port 161?????

[CowBoy]

Dear All
The problem is i need to configure snmp agent for monitoring CPU/IO usage???

[Roopesh Francis_1]

please check this link.
http://docs.hp.com/en/32022-90051/ch08s04.html

[CowBoy]

That was not helpful .
my problem is that snmp port is not open on my server an i could not telnet on port 161??????

[Andy Bustamante]

First make sure that snmp is running.

I opted to use the net-snmp package from HP Internet Express. http://h20338.www2.hp.com/hpux11i/cache/324414-0-0-0-121.html There is a problem with memory values returned on HP UX/Integrity which HP is reviewing. Perhaps another user with the same issue may help.

It seems the stock snmp provides limited details.

Andy Bustamante

[CowBoy]

Hi Andy
I installed The net-snmp but i dont know how can i configure that???

[Michal Kapalka (mikap)]

hi,

check this link :
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=912735

mikap

[CowBoy]

Hi
Is There anyone to give me a sample configuration of snmpd.conf?????

[Michal Kapalka (mikap)]

hi,

this is a real example of snmpd.conf

http://www.informatik.uni-frankfurt.de/doc/man/hpux/snmpd.conf.4.html

mikap

[Andy Bustamante]

I found this thread extremely helpful: http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1289501

As far as HP-UX goes, I consider myself a new user and the forum search tools have been very useful.

Andy Bustamante
If you would no perish then grow.