SS7 LAN problems between TSU and FE/BE

[Sergejs Svitnevs]

I have HP OpenCall SS7 SW/HW.
When I run ifconfig lanX on the FE/BE to check the settings of my dedicated LANs, I am getting a lot of carrier sense errors. The LAN interfaces of the FE/BE are configured to use 100baseTx-FD settings.
How can I view the speed and duplex settings of TSU LANs?
How do I set my TSU LANs to eq 100mb-full mode?

Many thanks in advance.
Regards,
Sergejs

[jayachandran.g]

Hi Svitnevs

i think this will help you


http://docs.hp.com/en/5990-7337/ch08s03.html#s7-3-5


thanks

Jayachandran.G

[Petr Arnstein]

Hi, Sergejs,

I have a very similar problem. We've got
a preinstalled duplex SS7 platform (2xrp3440 + 2xTSU, 1TSC each). Everything works except secondary links - those ones to additional (L1) cards in TSUs. The respective LAN ports on hosts are in 10Mbit half-duplex states and the TSUs are not reachable through these.
Manual setting to 100FD on hosts does not help.

I've double-checked everything and still no result.

Any help will be appreciated.

Thanks in advance & best Regards,
-Petr

[Petr Arnstein]

(repeated) use of ss7TsuReset helps