1833788 Members
2402 Online
110063 Solutions
New Discussion

stape driver issue

 
SOLVED
Go to solution
jhingoor
Frequent Advisor

stape driver issue

Hi guys,
i need to build stape driver for scsi tape drive...how do i do it...using command line interface....bcoz sam interface is not available.....can i use kmtune,kctune...etc....
11 REPLIES 11
RAC_1
Honored Contributor
Solution

Re: stape driver issue

man kcmodule
kcmodule -c "config_name" stape=best
There is no substitute to HARDWORK
jhingoor
Frequent Advisor

Re: stape driver issue

Hi RAC,
Since man is not accessible for me....can u please please give me the exact syntax of it...


kcmodule -c "what is config_name??"
Also i am not able to access kernel config thro sam...what is the reason...i have only kcweb option...for hpux 11i v2 4640 itanium..

its urgent ...
Thanks RAC...
RAC_1
Honored Contributor

Re: stape driver issue

kcweb, then on kcweb screen, you have modules option. Select that, then stape module and modify option. After that everything is self explainatory.
There is no substitute to HARDWORK
jhingoor
Frequent Advisor

Re: stape driver issue

Hi RAC,
The thing is that apache is not installed..as a result kcweb is not accessible..
Can u tell me why i am not getting another kernel config option apart from kcweb....

And also the kcmodule syntax..
Prompt response highly appreciated...
Arunvijai_4
Honored Contributor

Re: stape driver issue

Hi,

Just check with "sam". It has got kernel tuning capabilities.

-Arun
"A ship in the harbor is safe, but that is not what ships are built for"
jhingoor
Frequent Advisor

Re: stape driver issue

Hi arun,
In my sam there is only one option kcweb...and no other kernel tuning option....
RAC_1
Honored Contributor

Re: stape driver issue

kcmodule stape=best should do it. (you need to be root for it. This also requires a system reboot)

kcmodule -v stape to confirm it.
There is no substitute to HARDWORK
jhingoor
Frequent Advisor

Re: stape driver issue

Thanks RAC,
I will try it and let u know.....
jhingoor
Frequent Advisor

Re: stape driver issue

Hi RAC,
One last doubt...why there is no kernel config option in my sam window....except kcweb option....

Bcoz http apache is not installed....
Steven E. Protter
Exalted Contributor

Re: stape driver issue

Shalom,

As far as I know a kernel configuration option is standard on sam unless you are not root and have been given restricted sam access.

If you are root then there may be a problem with sam.

There does appear to be something fundamentally missing with your OS installation. Is it possible to reinstall?

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
jhingoor
Frequent Advisor

Re: stape driver issue

Hi RAC,
THanks the soln given by you worked excellently.........
kcmodule stape = static