stm_map_read 0 dummy /var/tmp/stm4636/mapread.cfg

[j773303]

OS: 11.00
STM: 11.11.15.13
EMS 4.0

Problem:
Does anyone has the experience about the meaning of below message.
==========================================
stm_map_read 0 dummy /var/tmp/stm4636/mapread.cfg
==========================================

The system got the many process as above.
Is it any problem on the system?

[TY 007]

Hello,

>> Is it any problem on the system?
Check /var/adm/syslog/syslog.log to confirm

>> The system got the many process as above

Restart Diagnostic Subsystem:
# /sbin/init.d/diagnostic stop
# /sbin/init.d/diagnostic start

Thanks

[TY 007]

Hello,

>> OS: 11.00
>> STM: 11.11.15.13

Is this a HP-UX 11.11 instead of HP-UX 11.00 OS?

Thanks

[TY 007]

Hello,

>> STM: 11.11.15.13

Install Latest "STM: 11.11.19.xx" from:
https://h20293.www2.hp.com/portal/swdepot/try.do?productNumber=B6191AAE

Thanks

[j773303]

sorry for the typing error,
OS : 11.11


After use kill -9 for all stm_map_read , then re-start diaglognics. stm_map_read process not forked again.

But, why stm_map_read forked ? Kindlhy see the attached files.

[whiteknight · Accepted solution]

Hi

please refer to this

http://docs.hp.com/en/diag/stm/stm_upd.htm#table

Your version of diagnostic is no longer supported
HWE 0412 Dec 2004 B.11.11.15.xx A.47.00

Have you installed this patch ?
PHSS_33673 11.11 Support Tool Manager Dec 2004


WK
please assign points

[TY 007]

Hello,

>> But, why stm_map_read forked ? Kindlhy see the attached files
>> Your version of diagnostic is no longer supported
>> HWE 0412 Dec 2004 B.11.11.15.xx A.47.00

STM: 11.11.15.13 is back-dated last 3 years ago, could be a bit buggy

Load in Latest Support Tool Manager Jun 2007, 11.11.19.xx:
https://h20293.www2.hp.com/portal/swdepot/try.do?productNumber=B6191AAE

Thanks

[TY 007]

Hello,

Additional Information:

For HP-UX 11.11 OS, Newer Release of STM Software Upgrade should not require any Server Reboot.

Thanks