tldd[21667]: TLD(0) unavailable: initialization failed

[j773303]

Does anyone has the experience about the below message in syslog.log ? Is any problem occurs in?


May 10 14:20:35 n4000-1 tldd[21667]: TLD(0) unavailable: initialization failed:
Control daemon connect or protocol error
May 10 14:21:14 n4000-1 ltid[21632]: Cannot register shared drives for host n400
0-1 on host hp5430: network protocol error
May 10 14:22:37 n4000-1 tldd[17262]: TLD(0) [17262] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:22:37 n4000-1 tldd[21667]: TLD(0) unavailable: initialization failed:
Control daemon connect or protocol error
May 10 14:24:39 n4000-1 tldd[17288]: TLD(0) [17288] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:26:42 n4000-1 tldd[17336]: TLD(0) [17336] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:28:44 n4000-1 tldd[17356]: TLD(0) [17356] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:30:46 n4000-1 tldd[17382]: TLD(0) [17382] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:32:48 n4000-1 tldd[17404]: TLD(0) [17404] unable to read ack from tldc
d, I/O ?y;~ (5), stat = -9
May 10 14:32:48 n4000-1 tldd[21667]: TLD(0) unavailable: initialization failed:
Control daemon connect or protocol error
May 10 14:33:24 n4000-1 above message repeats 5 times
May 10 14:33:14 n4000-1 ltid[21632]: Cannot register shared drives for host n400
0-1 on host hp5430: network protocol error
May 10 14:33:24 n4000-1 above message repeats 4 times

[Johan Lorimier]

Hi,
Are you using a tape on a fiber topology ?

This may append if you are using a shared tape. the daemon show you an error when another server is using the shared tape. I ve previously seen this kind of errors with netbackup media server on several hosts using the same storagetek drive.

Johan

[Fabio Ettore]

Hi,

can the following thread help you?

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=352808

Best regards,
Ettore