ulimit (out of memory prblm)

[Bill Hassell]

Correct--sort of. /stand/system is a copy of the parameters that were used to build the last kernel. Changing anything in there will have no effect.

You need to run SAM to change kernel parameters. There is nothing you can do to change the kernel parameters mentioned before without running SAM, and it will require a reboot.

[guru_1]

Thanks Bill,Steven,Steve and Harry..for you valuable suggestions ...I will look into it and read more on performace tuning.I cannot assign points as I am not able to find that option.

Thanks again !!!!


Cheers !!!

[Sanjay_6]

Hi Kuls,

Here is a link on iplanet performance tuning,

http://docs.iplanet.com/docs/manuals/enterprise/40/scaling/perf.htm

And here is a link from ITRC on system performance tuning,

http://us-support3.external.hp.com/iv/bin/doc.pl/sid=ac60d9fb101b11f920/screen=ivHome/?NODEID=English_SHW::WW_SW_UX_SYSADM_EN_E/Q1.7&WARP=1

Hope this helps.

Regds

P.S.: To assign points you should be logged into the ITRC.

[Frank Slootweg]

> The exact error is
> The WEBLOGIC server goes down saying "OUT OF MEMORY"

Do you (perhaps) also get *other* messages 'at' the same time (i.e. during or/and just before or/and just after), i.e. (also) in any *other* logfile?

I ask this because often people concentrate too much on one part of the problem, while the clues are in another part.