Operating System - HP-UX
1833883 Members
2091 Online
110063 Solutions
New Discussion

Re: Unable to verify installation

 
Harris Mir
Frequent Advisor

Re: Unable to verify installation

at some point i already ran /sbin/rc


as a result of "who -r":

run-level 3 - (todays date) 3 0 S
V. Nyga
Honored Contributor

Re: Unable to verify installation

Hi again,

Also I wouldn't set ip address to 127.0.0.1 - it's the standard for loopback - maybe call it 1.2.3.4 but I would change it, too.

V.
*** Say 'Thanks' with Kudos ***

Re: Unable to verify installation

> I started with the "install/update/recovery" CD, chose all the settings as the guidelines describe, then it asked me for the "Core OS Options" CD, then for the "Support Plus" CD.


So you used a core OS CD from Mar 2004, but when prompted for the options CD used one from Sep 2003?

I could be wrong, but I suspect this could be your problem... It's a long long time since I did a 11.00 install, but I'm pretty sure I *always* used CDs that came together from the same release... the way the install is "broken" makes this look even more likely to me...

HTH

Duncan

I am an HPE Employee
Accept or Kudo
Dennis Handly
Acclaimed Contributor

Re: Unable to verify installation

>Sunny123: In which run level you are? who -r

Unfortunately this isn't likely to work, it always returns 3.
Harris Mir
Frequent Advisor

Re: Unable to verify installation

Guys, thank you very much for your help.

I opened the box, made sure all teh cards were seated correctly powered up and reinstalled hp-ux.

That seems to have taken care of it. Thanks again.