Unidentified cpu type

[Pradeep_3]

Hi all,

I am trying to restore ignite backup which was taken on rp8400 to rp8420.But after
restoration server is not getting rebooted
stating unidentified cpu type.

what should be done
Prasad

[Devender Khatana]

Hi Prasad,

The CPU type in both is different. 8400 has a PARISC 8700 CPU whereas 8420 has dual core PARISC 8800. This was very much expected. You should try doing a fresh os install or restore ignite taken from some other 8420 server.

You can go for using ignite golden image as well. Just see discussion in this thread also.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=866495

HTH,
Devender

[Bill Hassell]

You probably used an old version of Ignite/UX. The make_tape_recovery (and network version) are very sensitive to hardware features. So before you make a recovery tape, always download the latest version, especially if your current versin is more than 6 monmths old.