upgrade to 10.20

[zhangyi_2]

How to upgrade HPUX 10.10 to 10.20, who could tell me?
Whether install with 10.20's disk or install any patch?
Yes-which pacths?

[CHRIS_ANORUO]

Check itrc.hp.com for upgrade parameters.

[zhangyi_2]

sorry, I'm not permission to read the upgrade's information.

[Alex Glennie]

Updating your system from an earlier HP-UX 10.x, to HP-UX 10.20, involves using swinstall and other
SD-UX tools with a standard source, such as a network server, tape, or CD-ROM, to install the appropriate
bundles, products, or filesets.

Upgrading means using a suite of tools (version 9.U3 of the Upgrade tools) to update your system from HP-UX
9.0x to 10.0x. For upgrading your system, refer to the manual Upgrading from HP-UX 9.x to 10.x .

If you plan to update from HP-UX 10.0 to 10.20, you will have to update your system first to HP-UX 10.01.

It is highly recommended that you do a system backup before starting to do an update.

If you are updating from HP-UX 10.10 or earlier, you will have to first update SD-UX (the set of tools that includes swinstall), using swgettools, before you can run swinstall.


Executing swinstall to update from 10.0, 10.01, or 10.10 to 10.20 will not succeed unless you first obtain and execute the swgettools command found on the 10.20 media. This will update the SD-UX commands. Failure to update SD-UX from the old version will result in error messages and failure of the update process.

[Tony Constantine_1]

would recommend creating an ignite backup of current os first then do a clean install from the HPUX Core OS cd

[zhangyi_2]

Tony Constantine, how to resume my application?
Ignite will just recover other app? and not OS?
I don't hope to reinstall other app,cause too much.