UPS Problem In HPUX 11

[Dummy_Guy]

Hi all,
I have a problem with my UPS.
Everytime I did the test by turn off the power on the wall. My UPS Daemon will show:
syslog.log:Mar 16 10:36:20 COAAUW13 /usr/lbin/ups_mond[1441]: /usr/lbin/ups_mond
: UPS Monitor daemon starting; using configuration file /etc/ups_conf
syslog.log:Mar 16 10:36:23 COAAUW13 /usr/lbin/ups_mond[1441]: /usr/lbin/ups_mond
: UPS /dev/tty0p1 read failed: File exists; Uninterruptable Power Supply has not
been connected correctly; loss of power would not be detectible
syslog.log:Mar 16 10:36:29 COAAUW13 /usr/lbin/ups_mond[1441]: /usr/lbin/ups_mond
: UPS /dev/tty0p1 read of status failed: File exists
syslog.log:Mar 16 10:36:33 COAAUW13 /usr/lbin/ups_mond[1441]: /usr/lbin/ups_mond
: UPS /dev/tty0p1 interrupted but read of ups status failed - possible UPS hardw
are problem

The cable between UPS and Unix is checked.
UPS Daemon has turned up.
UPS Shutdown is activate.

more ups_conf
shutdown_delay_mins:5
shutdown_timeout_mins:10
upstty:/dev/tty0p1

What else I haven't done?

[RAC_1]

Looks like system can communicate with UPS correctly. Can you see device on the UPS device?? (on /dev/tty0p1?)

[Dummy_Guy]

I can see the Interface.
:/etc #ioscan -funC tty
Class I H/W Path Driver S/W State H/W Type Description
==================================================================
tty 0 0/0/4/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag1 /dev/diag/mux0 /dev/tty0p1
/dev/cua0p2 /dev/mux0 /dev/tty0p2
/dev/cul0p2 /dev/tty0p0 /dev/ttyd0p2
tty 1 0/0/5/0 asio0 CLAIMED INTERFACE PCI Serial (103c1048)
/dev/GSPdiag2 /dev/mux1
/dev/diag/mux1 /dev/tty1p1